Table of Contents
Advertisement
Operation
Auto,Cool， Dry and Fan operation
(1) Unit start
Press ON/OFF button, unit starts.
(2) Select operation mode
Press MODE button. For each press, operation
mode changes as follows:
Remote controller:
Display board:
Unit will run in selected mode.
(3) Select temp. setting
Press TEMP button.
Every time the button is pressed, temp. setting increases 1
Every time the button is pressed, temp. setting decreases 1
Unit will start running to reach the temp. setting on LCD.
(4) FAN
Press FAN button. For each press, fan speed changes
as follows:
AUTO
Unit will run at selected fan speed.
Note:AUTO is not available in FAN mode.
(5) Unit stop
Press ON/OFF button.
Note:
1.
When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according
to room temperature.
2.In DRY mode, when room temperature becomes lower than temp.setting+2
unit will run intermittently at LOW speed regardless of FAN setting.
In FAN operation mode, the unit will not operate in COOL mode but only in FAN mode ,
3.
AUTO is not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is not available.
AUTO
COOL
DRY
(BLANK)
COOL
DRY
AUTO
LO
MED
FAN
BLANK
FAN
HI
5
HEALTH
ON/OFF
1
5
FAN
4
MODE
3
2
SWING
TIMER
CLOCK
SET
SLEEP
LOCK
RESET
o
C
o
C
o
C,
3
Advertisement
Table of Contents
