Advertisement
Quick Links
Instruction Manual for: LF2002
FLOOR LAMP WITH 2 READING LIGHTS
Questions?
E‐mail our customer service department at
customerservice@alltherages.com
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is wider
SWITCH
than the other). As a safety feature to reduce the risk of
electrical shock and fire, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician. Never use with an extension cord unless the plug
can be fully inserted. Do not alter this safety feature.
This lamp is for indoor use only. The lamp should not be
used near water. Never immerse the lamp in water or other
liquids. Never cover the lamp with any object including cloth
or paper as this is a fire hazard. Do not handle the bulb
immediately after the light is turned off as it will be hot. This
is not a toy.
ASSEMBLY INSTRUCTIONS:
1. Lay out all parts on a flat surface.
2. Begin assembly at the bottom of the lamp.
3. Insert lamp pole (B) into lamp base (A) and tighten.
4. Insert lamp pole (C) into lamp pole (B) and tighten.
5. Repeat for lamp poles (D) and (E).
*If necessary, pull cord down through poles and out the
bottom of the base.
6. Place decorative holder (F) into the socket on pole (E).
7. Remove the socket nut from lamp holder (E), and install
lamp shade (G) into the decorative holder (F) and secure by
replacing the socket nut (H).
8. Remove the socket nut (J) from the reading light, install
lamp shade (I) into the lamp holder and secure by replacing
the socket nut. Do the same for the other reading lamp.
9. Install bulbs. Only use bulbs of specified type and
maximum rated wattage or less.
10. Plug the electrical supply cord into the wall outlet.
11. To turn ON/OFF use the rotary switch located on the
lamp holder (E) This switch controls all 3 lights.
First Turn: Both reading lights will turn on
Second Turn: Main Light Only
Third Turn: All 3 lights on
Fourth Turn: All lights off
1 x Type A Medium Base Bulb (not included)
100W
CLEANING & MAINTENANCE:
Main Light
1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint‐free cloth.
60W 2 x Type A Medium Base Bulb (not included)
3. Do not use water or other chemical cleaning agents.
Reading Lights
1
Advertisement
Related Manuals for Elegant Designs LF2002
Summary of Contents for Elegant Designs LF2002
- Page 1 Instruction Manual for: LF2002 FLOOR LAMP WITH 2 READING LIGHTS Questions? E‐mail our customer service department at customerservice@alltherages.com IMPORTANT SAFETY INSTRUCTIONS: This portable lamp has a polarized plug (one blade is wider SWITCH than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature. This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy. ASSEMBLY INSTRUCTIONS: 1. Lay out all parts on a flat surface. 2. Begin assembly at the bottom of the lamp. 3. Insert lamp pole (B) into lamp base (A) and tighten. 4. Insert lamp pole (C) into lamp pole (B) and tighten. 5. Repeat for lamp poles (D) and (E). *If necessary, pull cord down through poles and out the bottom of the base. 6. Place decorative holder (F) into the socket on pole (E). 7. Remove the socket nut from lamp holder (E), and install lamp shade (G) into the decorative holder (F) and secure by replacing the socket nut (H). 8. Remove the socket nut (J) from the reading light, install lamp shade (I) into the lamp holder and secure by replacing the socket nut. Do the same for the other reading lamp. 9. Install bulbs. Only use bulbs of specified type and maximum rated wattage or less. 10. Plug the electrical supply cord into the wall outlet. 11. To turn ON/OFF use the rotary switch located on the lamp holder (E) This switch controls all 3 lights.
- Page 2 LIMITED WARRANTY All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101, Livingston, NJ 07039 (All the Rages) warrants its products (the "products") as follows: 1. Limited Warranty. Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer's satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, as its own expense, furnish replacement products or, at Manufacturer's option, replacement parts for the defective products. Installation of the replacement products or replacement parts shall be at Buyer's expense. 2. Exclusive Obligation: THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. Manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, or consequential damages. 3. Other Statements. Manufacturer's employees or representatives' oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty. 4. Entire Obligation. This Limited Warranty states the entire obligation of Manufacturer with respects to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect. ALL THE RAGES INC 355 EISENHOWER PARKWAY SUITE 101 LIVINGSTON, NJ 07039 WWW.ALLTHERAGES.COM PRINTED IN CHINA...
Need help?
Do you have a question about the LF2002 and is the answer not in the manual?
Questions and answers