Crisper And Crisper Cover - Haier HRF10WND User Manual

English

Crisper and Crisper Cover

To remove and install the crisper: (see fig. # 7)
1. Grip the crisper firmly and slide out completely.
2. Replace the crisper by placing the crisper properly in position and
gently sliding it back into place.
Removing or replacing the crisper cover: (see fig. # 8)
1. Carefully grasp the crisper cover and slide out to remove.
2. To replace, slide the rear of the crisper cover into the right and left slots
above the crisper area and gently slide back into place.
11
fig. # 7
fig. # 8