Setting Up The Refrigerator/Freezer Combi - Haier HRF-660S User Manual

Refrigerator/freezer combi
Hide thumbs Also See for HRF-660S:
Table of Contents

Advertisement

Setting up the Refrigerator/Freezer Combi

Be sure to choose a flat and level setup location.
Use sturdy and fireproof supports to correct an
unevenness in the floor. Turning an appliance
foot clockwise raises the appliance, turning it
anticlockwise lowers the appliance.
Protect the setup location against direct sunlight
or heat sources.
Avoid a damp setup location. Remove water
and dirt with a soft rag.
Door adjustment
If the freezer compartment door is lower than
that of the refrigerator compartment, insert the
wrench in the groove of the left screw and turn it
in the direction of the arrow until both doors are
the same height.
Height difference
Wrench
Left screw
If the freezer compartment door is lower than
that of the refrigerator compartment, insert the
wrench in the groove of the left screw and turn it
in the direction of the arrow until both doors are
the same height.
Height difference
Height
difference
Be sure to leave at least 10 cm of space around
the appliance. When installing the appliance in
an enclosed area, leave at least 25 cm of space
on the sides and 5 cm on the top and back.
Spacing
Height
difference
Wrench
Right bolt
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents