GT-Lite GT-CTB40-WET Installation

Complete LED Lighting Solutions
Installation: GT-CTB40-WET | 4500LM/40W LED High Lumen IP65 E26 Bulb
10.51"
3.66"
This product may present a possible shock or fire hazard if improperly
installed or mounted. Products should be installed following these instructions,
local electrical codes, and the current National Electric Code (NEC).
Lumen: 4500LM
Watts: 40W
Equivalent to 250W Incandescent
LED Lifespan: 50,000 Hours
Operating Voltage: 100-277V AC
CRI: 80
Color Temp (CCT): 5000K Daylight
Base: E26 / Standard Edison Base
Wet Rated
Operating Temperature: -4°F to 104°F
Ballast must be bypassed if present.
Enclosed fixture rated.
- When using product, basic precautions should always be followed.
- Read and follow these instructions and observe all warnings.
- Carefully read and understand the information given in this manual
before beginning installation. Failure to do so could lead to electric
shock, fire, or other injuries which could be hazardous or even fatal.
- Save these instructions and warnings.
- NEVER submerge this product in water!
- Do not use in on hot surfaces.
- Do not use in areas near a gas source.
- It is NOT possible to change the LED light source.
- This light is not intended for use in potentially explosive
environments. This is NOT a vapor proof light.
- This work light is NOT A TOY and is not suitable for use by children.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK,
SHUT OFF POWER BEFORE
INSTALLING OR SERVICING THIS FIXTURE
(-20°C to 40°C)