GT-Lite GT-RL-FL Assembly & Installation

16ft led rgb color rope light

Advertisement

Complete LED Lighting Solutions
Assembly & Installation: GT-RL-FL | 16ft LED RGB Color Rope Light
- Basic precautions should always be followed when using product.
- Read and follow these instructions and observe all warnings.
- Carefully read and understand the information given in this manual
before beginning installation. Failure to do so could lead to electric
shock, fire, or other injuries which could be hazardous or even fatal.
- Save these instructions and warnings.
- Warning: This rope light may present a shock or fire hazard if the
Installation Instructions are not followed carefully. Install only
in locations that follow current electrical codes and adhere
to National Electric Code (NEC) standards.
- Do not connect the rope light to power prior to installation.
- This Patriot Lighting rope light is connectible up to 160 feet.
- Please follow instructions for extending the rope light found on
Page 3 under LINKING INSTRUCTIONS.
- This item is water resistant only. NEVER submerge in water!
- Do not run this tape light off of any power supply other than the
adapter provided in this package. Failure to follow this guideline
will result in voided product warranty.
- Never place power supply, receiver, or remote in locations
exposed to moisture.

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK,
SHUT OFF POWER BEFORE
WHILE INSTALLING OR SERVICING UNIT!
INSTALLING OR SERVICING THIS FIXTURE
PAGE 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GT-RL-FL and is the answer not in the manual?

Questions and answers

Summary of Contents for GT-Lite GT-RL-FL

  • Page 1 Complete LED Lighting Solutions INSTALLING OR SERVICING THIS FIXTURE Assembly & Installation: GT-RL-FL | 16ft LED RGB Color Rope Light - Basic precautions should always be followed when using product. - Read and follow these instructions and observe all warnings.
  • Page 2 Assembly & Installation: GT-RL-FL | 16ft LED RGB Color Rope Light PRODUCT SPECIFICATIONS: 16ft LED ROPE LIGHT Color Temp Light Appearance Mulit-Color Power Used (Watts) 1.7ft 18/2 AWG Power Cord BEFORE BEGINNING INSTALLATION: PARTS LIST Make sure that all parts in parts list A.
  • Page 3 Assembly & Installation: GT-RL-FL | 16ft LED RGB Color Rope Light INSTALLATION INSTRUCTIONS: 1. Measure and ensure there is enough room for the rope light to be attached to desired installation location. 2. Use screws and mounting brackets to create the desired path for rope light.
  • Page 4 Assembly & Installation: GT-RL-FL | 16ft LED RGB Color Rope Light REMOTE CONTROL SETTINGS: Controller on Power Cord: Infrared Remote Control: • The Remote uses an Infrared Signal to change the color via the receiver node on the Power Cord Controller.

Table of Contents