Haier HB21FC45N User Manual page 17

SETTING THE CONTROL FUNCTIONS (CONT'D)
(10) The water filter indicator setting
When the indicator light of the water filter is lit up, the water filter should be
changed. After the water filter is changed, press and hold the water filter reset
button M for one second. The indicator light of the water filter N will go out.
Caution! When the water filter needs to be changed, please refer to the "water
filter" section.
MUST FLUSH 3.75 GALLONS THROUGH FILTER BEFORE USE
(approximately 5 minutes.)
Note: Our water filters comply with CA. propositions requirements.
(11) Energy Saver
1. The energy saver button is initially set to ON. You can see "ES" on the right
display for 3 seconds when you open the refrigeration doors, then it will turn
back to show the refrigeration temperature.
2. By pressing and holding the "energy saver" button M on the control panel for
5 seconds, you can turn on or off the Energy Saver feature.
3. "ES" will appear only when the Energy Saver in the ON position.
Note: See additional information on page 3.
ENERGY SAVER
M N
ENERGY SAVER
M
English
16