Brady BBP 16 User Manual
  1. Manuals
  2. Brands
  3. Brady Manuals
  4. Barcode Reader
  5. BBP16
  6. User manual
Brady BBP 16 User Manual

Brady BBP 16 User Manual

Thermal transfer / direct thermal bar code printer
Hide thumbs Also See for BBP 16:
Table of Contents

Advertisement

Quick Links

Download this manual
Thermal Transfer / Direct Thermal
Bar Code Printer
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BBP 16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Brady BBP 16

Summary of Contents for Brady BBP 16

  • Page 1 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 2 This page is intentionally left blank.
  • Page 3 Information in this document is subject to change without notice and does not represent a commitment on the part of Brady Worldwide, Inc. No part of this manual may be reproduced or transmitted in any form or by any means, for any purpose other than the purchaser’s personal use, without the expressed written permission of Brady Worldwide, Inc.
  • Page 4 ICES-003 Issue 4:2004 Class A AS/NZS CISPR 22:2009 CLASS A GB-4953-2001 GB9254-2008 (CLASS A) GB17625.1-2003 UL 60950-1(2nd Edition) CSA C22.2 No. 60950-1-07(2nd Edition) EN 60950-1/A1:2010 IEC 60950-1/A1:2009 IEC 60950-1:2005(2nd Edition) BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 5: Table Of Contents

    2.6.3 Loading Media in Peel-off Mode (Option)..........24 2.6.4 Remove Liner from Internal Rewind (Option) .........26 2.6.5 Loading Media in Rewind Liner with Label Mode (Option) .....27 2.6.6 Remove Labels from Internal Rewind (Option) ........29 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 6 5.3 Using Ethernet interface to setup Ethernet interface ........74 6. Troubleshooting ....................76 6.1 Common Problems..................76 6.2 Mechanism Fine Adjustment to Avoid Ribbon Wrinkles ........80 7. Maintenance.....................83 Revise History......................84 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 7: Introduction

    • Applications Industrial-duty printing Healthcare patient safety Compliance labeling Work in process Order fulfillment Distribution Shipping/ receiving Ticketing Electronics & jewelry labeling BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 8: Product Features

    PS/2 keyboard interface for stand-alone or data entry at print site 32 MB SDRAM memory 8 MB FLASH memory SD FLASH card memory expands storage to 4 GB Powerful 32 bit 200 MHz RISC processor BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 9 Code128 subsets A.B.C, QR code, Codabar, Aztec Interleave 2 of 5, EAN-8, EAN-13, EAN-128, UPC-A, UPC-E, EAN and UPC 2(5) digits add-on, MSI, PLESSEY, POSTNET, China POST, RSS-14, Code 11 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 10: Printer Optional Features

    Input: 115~230VAC, 50/60Hz Output: 24V, 8.33A, 200W Environmental condition Operation: 5 ~ 40˚C (41 ~ 104˚F), 25~85% non-condensing Storage: -40 ~ 60 C (-40 ~ 140 F), 5~90% non-condensing BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 11: Print Specifications

    1 inch (25.4 mm) Max. 114.3 mm (4.5”) Ribbon width Min. 25.4 mm (1.0”) Ink coated outside wound, ink coated inside wound Ribbon wound type Ribbon end type Transparency BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 12: Media Specifications

    Min. 5 mm (0.20”) Min. 5 mm (0.20”) Min. 5 mm (0.20”) Gap height Min. 2 mm Black mark height Min. 2 mm Black mark width Min. 8 mm (0.31”) BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 13: Operations Overview

    One quick installation guide One power cord One USB interface cable If any parts are missing, please contact the Customer Service Department of your purchased reseller or distributor. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 14: Printer Overview

    2.2 Printer Overview 2.2.1 Front View 1. LED indicators 2. LCD display 3. Front panel buttons 4. Paper exit chute 5. Lower front cover 6. Printer right side cover BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 15: Interior View

    12. Media sensor lock lever 13. Z axis mechanism adjustment knob 14. Print head pressure adjustment knob 15. Anti-static brush 16. Ribbon sensor 17. Media sensor 18. Label guide BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 16: Rear View

    9. USB host (Option) 10. PS/2 interface 11. Power switch Note: The interface picture here is for reference only. Please refer to the product specification for the interfaces availability. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 17 - The DOS FAT file system is supported for the SD card. - Folders/files stored in the SD card should be in the 8.3 filename format - The miniSD/microSD card to SD card slot adapter is required. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 18: Operator Controls

    The printer power is turned on Printer is ready Pause Blinking Downloading data into printer. Printer is ready “CARRIAGE OPEN” or “CUTTER ERROR” “NO PAPER”, “PAPER JAM”, “NO RIBBON” or “CLEAN DATA” Blinking BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 19: Front Panel Keys

    Note: Please switch OFF printer power switch prior to plug in the power cord to printer power jack. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 20: Loading Ribbon

    1. Open the printer right side cover. 2. Push the print head release lever to open the print head mechanism. 3. Install the ribbon onto the ribbon supply spindle. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 21 3~5 circles onto the ribbon rewind spindle until it is smooth and properly stretched. 6. Close the print head mechanism, Make sure the latches are engaged securely. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 22 Loading path for ribbon BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 23: Remove Used Ribbon

    2. Push the ribbon release button to release the ribbon on the ribbon rewind spindle. 3. Then, slide off the ribbon from ribbon rewind spindle. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 24: Loading The Media

    2. Push the print head release lever to open the print head mechanism. 3. Move the label roll guard horizontally to the end of label spindle then flip down the label roll guard. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 25 5. Pull label roll leading edge forward through the media guide bar, damper, media sensor and place the label leading edge onto the platen roller. Media guide bar Media sensor Label guide Damper BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 26 * The media sensor position is moveable, please make sure the gap or black mark is at the location where media gap/black mark will pass through for sensing. 7. Adjust the label guide to fit the width of the label. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 27 9. Using the front display panel, set the media sensor type and calibrate the selected sensor. (Please refer to section 3.1.2) Note: Please calibrate the gap/black mark sensor when changing media. Loading path for roll labels BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 28: Loading Fan-Fold Labels

    6. Close the print head mechanism. Make sure the latches are engaged securely. 7. Set the media sensor type and calibrate the selected sensor. (Please refer to section 3.1.2) Note: Please calibrate the gap/black mark sensor when changing media. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 29 Loading path for fan-fold labels BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 30: Loading Media In Peel-Off Mode (Option)

    8. Then, pull approximately 650mm of label through the front of the printer. 9. Push down the peel-off roller release lever. Peel-off roller release lever 10. Feed the label between peel-off roller and platen roller. Peel-off roller BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 31 13. Move the peel-off sensor toward the paper exit chute. Peel-off sensor 14. Peeling will automatically start. Press the FEED button to test. Liner Label Note: Please calibrate the gap/black mark sensor when changing media. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 32: Remove Liner From Internal Rewind (Option)

    2. Push the liner release button to release the liner on the internal rewind spindle. 3. Then, slide off the liner from internal rewind spindle. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 33: Loading Media In Rewind Liner With Label Mode (Option)

    4. Then, pull approximately 650mm of label through the label redirect front panel. 5. Wrap the label onto the internal rewind spindle and stick the label onto the paper core. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 34 7. Using the LCD panel to set the media sensor type and calibrate the selected sensor. (Please refer to section 3.1.2) Note: Please calibrate the gap/black mark sensor when changing media. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 35: Remove Labels From Internal Rewind (Option)

    If the label is less than 2” wide, increase the left side print head pressure by rotating the adjustment knob clockwise and decrease the right side pressure by rotating the adjustment knob counter-clockwise to level 1. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 36: Print Head Burn Line Adjustment Knob

    Continue to adjust the burn line position and test print as necessary until the printout image is clear. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 37: Using The Keyboard With Ps/2 Interface

    Press Enter key of the keyboard to enter/execute cursor located option. Press Ctrl + C keys of the keyboard to restart the printer and back to “Ready” state. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 38: Menu Function

    Exit *Ethernet Exit Exit Japanese Exit German Italian French Russian Polish Spanish Exit Notice: * Ethernet function is available on the LCD display when Ethernet card is installed. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 39: Setup Menu Overview

    Status ZPL2 Calibration Parity Configure Exit Exit Data Bits Exit Stop Bit(s) Exit Notice: * Ethernet function is available on the LCD display when Ethernet card is installed. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 40 Peeler Mode Cutter Mode Cutter Batch Exit 1252 1250 1253 1254 1251 1255 1256 Exit 1257 1258 8859-1 8859-2 8859-3 8859-4 8859-5 8859-6 8859-7 8859-8 8859-9 8859-10 8859-15 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 41 Press key to cancel the setting and return to the previous menu. The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 42 Cut the label once at the end of the printing job. Note: If printing from enclosed software/driver, the software/driver will send out the command, which will overwrite the setting set from the front BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 43 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 44 The default value is 000. Note: If printing from enclosed software/driver, the software/driver will send out the REFERENCE command, which will overwrite the setting set from the front panel. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 45 Note: If printing from enclosed software/driver, the software/driver will send out the command, which will overwrite the setting set from the front panel. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 46 Character Set Character Set 8859-1 Latin 1 8859-7 Greek 8859-2 Latin 2 8859-9 Turkish 8859-3 Latin 3 8859-10 Latin 6 8859-4 Baltic 8859-15 Latin 9 8859-5 Cyrillic BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 47 Spanish United Brazil (Spain) Kingdom Canadian- English Hungarian Danish French (International) Spanish (Latin Yugoslavian Swedish Portuguese America) Dutch Italian Norwegian Finnish Belgian Switzerland Polish French Slovak German (France) BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 48 Close Position +000 Tear +000~ +0000 <x> xxx <x> xxx Feed Feed ~-000 -000 ~-0000 Peel Calibration Calibration Cutter Length Length Exit No Motion No Motion Exit Exit BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 49 The default value is +000. Note: If printing from enclosed software/driver, the software/driver will send out the command, which will overwrite the setting set from the front panel. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 50 Note: If printing from enclosed software/driver, the software/driver will send out the command, which will overwrite the setting set from the front panel. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 51 Printing … 9/17 > List Setup Control Prefix Format Prefix This feature is used to print current printer configuration to the label. Press button to print the list. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 52 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 53 Printer default setting is No Motion. When enter this list, the print mode in the right side of “ >” icon is the printer current setting. Press to select the different print mode and press button to enable the setting. Press BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 54 Press key to cancel the setting and return to the previous menu. The default value is +000 and range is -120 to +120 dots. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 55 Calibration Gap Mode Bline Mode Cont. Mode Exit Automatic Automatic Automatic Manual Manual Manual Pre-Printed Pre-Printed Exit Exit Exit BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 56 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 57 “0” to “9” and the “dot/ mm/ 0024 dot inch”. Press the button to set the gap size into the printer. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 58 Label with liner Gap Mode 5. The gap sensor calibration is complete. Press the button Complete the LCD screen will return to the previous menu. Intensity Ref. Level BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 59 3. Then, printer will feed labels to Gap Mode calibrate the sensor sensitivity Pre-Printed automatically. When calibration is completed, the LCD screen will return to the previous menu. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 60 “0” to “9” and the “dot/ mm/ 0024 dot inch”. Press the button to set the bline size into the printer. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 61 Bline Mode 5. The bline sensor calibration is complete. Press the button Complete the LCD screen will return to the previous menu. Intensity Ref. Level BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 62 3. Then, printer will feed labels to Bline Mode calibrate the sensor sensitivity Pre-Printed automatically. When calibration is completed, the LCD screen will return to the previous menu. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 63 Ref. Level Cont. Mode 2. Then, put the continuous label under the media sensor. Press the Scan Paper button to set the value into Intensity the printer. Ref. Level BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 64 Parity Data Bits Stop Bit(s) Exit 1200 bps None 2400 bps 4800 bps Even Exit Exit 9600 bps Exit 19200 bps 38400 bps 57600 bps 115200 bps Exit BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 65 When you enter this list, the Data Bits in the right side of “>” icon is the printer current setting. Press key to cancel the setting and return to the previous menu. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 66 Press key to cancel the setting and return to the previous menu. Ethernet Status Configure Exit IP Address DHCP Static IP Exit Exit BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 67 Status IP Address 001B82-FF0918 Configure > Exit Exit The MAC address information will be shown on the LCD display. Please press button to return to the previous menu. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 68 DHCP SELECT: MENU: Press button the printer will set DHCP and restart to reset the setting. Press button to return to the previous menu. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 69 “0” to “9”. Press button to next setting. Static IP SELECT: MENU: Press the button printer will restart to reset the Ethernet module setting. Press key to cancel the setting. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 70: File Manager

    DEMO.BAS DOWN: Delete To run the file (.BAS) Please follow the order to press the button. FLASH File List DEMO.BAS DEMO.TTF 406 Byte(S) > DEMO.BAS DOWN: Delete SELECT: BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 71: Avail. Memory

    File Manager File List Del. All Files File List > DRAM Avail. Memory FALSH SELECT: > Del. All File CARD MENU: BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 72: Diagnostics

    Print speed Print darkness Label size (width, height) Black mark or gap size (vertical gap, offset) Sensor sensitivity Ethernet settings information (option) File management information Print head test pattern BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 73: Dump Mode

    D F,“TEST 44 20 46 2C 22 54 45 53 54 4.DAT“,5, 34 2E 44 41 54 22 2C 35 2C 43 4C 53 0D 0A ASCII Data Hexdecimal data related to left column of ASCII data BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 74: Rotate Cutter

    The default language setting is English. 3.5 Service Service Initialization Mileage Info. Exit This feature is used to restore printer settings to defaults and display printer mileage information. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 75: Initialization

    IP address DHCP 3.5.2 Mileage Info. Use this option to check the printed mileage (displayed in meter). Service Mileage: (m) Initialization 4016 > Mileage Info. Labels: (pcs.) Exit 51698 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 76: Diagnostic Tool

    2. There are four features (Printer Configuration, File Manager, Bitmap Font Manager, Command Tool) included in the Diagnostic utility. Features tab Interface Printer functions Printer setup Printer Status BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 77: Printer Function

    Configuration Page Print printer configuration Note: For more information about Diagnostic Tool, please refer to the diagnostic utility quick start guide in the CD disk \ Utilities directory. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 78: Setting Ethernet By Diagnostic Utility

    5. Click on the “Ethernet Setup” button from “Printer Function” group in Printer Configuration tab to setup the IP address, subnet mask and gateway for the on board Ethernet. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 79: Using Rs-232 Interface To Setup Ethernet Interface

    5. Click on the “Ethernet Setup” button from printer function of Printer Configuration tab to setup the IP address, subnet mask and the gateway for the on board Ethernet. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 80: Using Ethernet Interface To Setup Ethernet Interface

    Click “Set IP” to take effect the settings. Users can also change the “Printer Name” by another model name in this fields then click “Set Printer Name” to take effect this change. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 81 IE or Firefox web browser. This feature provides a user friendly setup interface and the capability to manage the printer remotely over a network. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 82: Troubleshooting

    * Make sure the thickness of label is less than MENU: * Cutter PCB is damaged. 200 g/m2 (for regular cutter) or 300 g/m2 (for Exit heavy duty cutter). * Replace a cutter PCB. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 83 * Make sure the keyboard is fine. correctly. * Make sure if there is any BAS file downloaded * There is no BAS file in the printer. into printer. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 84 * Calibrate the sensor by Auto Gap or Manual * Sensor sensitivity is not set properly. printing Gap options. * The media sensor is covered with dust. * Clear the GAP/Black mark sensor by blower. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 85 * Turn off and on the printer to skip the dump * The printer is in Hex Dump mode. Irregular printing mode. * The RS-232 setting is incorrect. * Re-set the Rs-232 setting. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 86: Mechanism Fine Adjustment To Avoid Ribbon Wrinkles

    1. Wrinkle happens from label lower left to 2. Wrinkle happens from label lower right Symptom upper right direction (“ ”) to upper left direction (“ ”) Wrinkle Feed direction Example BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 87 * If the winkled direction is change from “ ” to “ ” by adjusting the Z-axis mechanism adjustment knob, please turn the Z axis mechanism adjustment knob counter clockwise to avoid the wrinkle. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 88 BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 89: Maintenance

    Please use 100% Ethenol. DO NOT use medical alcohol, which may damage the printer head. Regularly clean the print head and supply sensors once change a new ribbon to keep printer performance and extend printer life. BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...

  • Page 90: Revise History

    Revise History Date Content Editor Brady 22 May 2012 Brady BBP16 User’s Manual BBP 16 Thermal Transfer / Direct Thermal Bar Code Printer User’s Manual...
  • Page 91 © 2012 Brady Worldwide, Inc. All Rights Reserved. Brady Corporation 6555 West Good Hope Road P.O. Box 2131 Milwaukee, WI 53201-2131 Y 2 2 7 1 9 1 5 www.bradycorp.com...

Table of Contents