D-Link AirPremier AG DWL-AG660 Manual page 14

Using the Configuration Utility (continued)
Link Info
Status: Displays
the MAC address of
the access point
that is associated
with the DWL-
AG660.
SSID: The Service
Set Identifier is the
name assigned to
the wireless
network. The
factory SSID
setting is set to
default.
Frequency:
The DWL-AG660 is a dualband wireless cardbus adapter. In this instance the
5280MHz indicates that the DWL-AG660 is communicating in the 5GHz band
(802.11a).
Wireless Mode: Either Infrastructure or Ad-Hoc will be displayed here.
Encryption: You can see if WEP is enabled or disabled here.
Tx Rate: Tx Rate settings are automatically determined for an optimal speed
up to a maximum of 54Mbps.
Channel: The channel selection is automatically determined by the DWL-AG660.
Link Quality / Signal Strength: Displays the Link Quality for the DWL-AG660
wireless connection to the access point. The Signal Strength represents the
wireless signal between the access point and the DWL-AG660. The percentage
coincides with the graphical bar.
Data Rate: Displays the statistics of data transmitted and received.
Rescan: Rescans for the strongest signal in your environment and associates
with the access point or router.
14