D-Link AirPremier AG DWL-AG660 Manual page 11

Getting Started (continued)
Setting up a Wireless
Infrastructure
Network
For a typical wireless
setup at home (as
shown here), please
do the following:
You will need broadband Internet access (a Cable or DSL-subscriber
line into your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router (see the
Quick Installation Guide included with your router).
If you are connecting a desktop computer to your network, you can
install the D-Link AirPremier AG DWL-AG530 Wireless PCI Adapter
into an available PCI slot on your desktop computer. You may also
install the DWL-A520, DWL-G520 or other compatible D-Link Wireless
PCI Adapter.
(See the Quick Installation Guide included with the network adapter).
Install the D-Link DWL-AG660 Wireless Cardbus Adapter into a laptop
computer.
(See the Quick Installation Guide included with the DWL-AG660).
If you wish, you may connect a computer that is equipped with an
Ethernet network adapter (such as a DFE-530TX+) to the router also.
A RADIUS server is optional. Connect a RADIUS server to your network
to use all the features of WPA. (Without a RADIUS server you can still
use the WPA Pre-Shared Key mode.) RADIUS Authentication can also
be provided by another service provider over the Internet and remote to
your network site.
2 2 2 2 2
7 7 7 7 7
6 6 6 6 6
3 3 3 3 3
DI-784 DI-784 DI-784 DI-784 DI-784
TM
11
1 1 1 1 1
4 4 4 4 4
530 530
530 530 530
DWL-AG DWL-AG DWL-AG
DWL-AG DWL-AG
5 5 5 5 5
660 660 660
DWL-AG DWL-AG 660 660
DWL-AG
DWL-AG DWL-AG
with Laptop PC with Laptop PC with Laptop PC
with Laptop PC with Laptop PC