Saxby 60895 Instruction Manual

Demister Operation
• Simply turn on the delisted switch on the side. The delisted pad will warm the mirror surface.
• The delisting effect will spread approximately 10-20% further than the pad itself.
Technical Data
Supply Shaver
220-240 V~, 50 Hz
115V - 240V dual socket
Voltage: Socket:
Bulb
12.7W LED module (SMD), 6500K This product contains a light source of energy efficiency class G.
Type:
Replaceable (LED only) light
source by a professional
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
This product is Class 1, must be connected to earth.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is rated at IP44.
44
IP
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
Mirror-Use a damp cloth or a propriety glass cleaner. Do not use abrasive materials as these will damage the finish.
Live Voltages may be present in this unit even when turned of or when completely disconnected. For your safety,
always switch off the power supply before changing lightbulbs, or cleaning.
The mirror must be replaced immediately should it become cracked or damaged. This fitting must
not be used without the mirror in place.
Replace Cracked Mirror
For further information, please visit https://www.lighting-info.co.uk/60895
V4 17/05/2023
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
Replaceable control gear by a
professional
Instruction manual
Rift Shaver Mirror
60895
www.saxbylighting.com