Advertisement
Advertisement
Table of Contents
Related Manuals for El.Mo ETR-BUSCNV
Summary of Contents for El.Mo ETR-BUSCNV
- Page 1 CP-ET8/4x in ETR serial bus adapter board mod. ETR-BUSCNV TECHNICAL MANUAL...
-
Page 2: For The Installer
Some products incorporate rechargeable or non rechargeable batteries as emergency power supply. Their wrong connection may damage the product, properties and the operator’s safety (burst and fire). YOUR DEALER: 2 - ETR-BUSCNV - TECHNICAL MANUAL... -
Page 3: Installation
46g. Parts supplied: 2 680 Ohm balance resistances, 4 Nylon clips, technical manual. ETR-BUSCNV board is an optional accessory of ETR control units and compatible ones, and has passed tests provided for CE conformity marking. 3. INSTALLATION View of the board. - Page 4 Mounting in the housing of ETR control unit, example with the maximum of installable boards for substitution of a CP100 control unit. 4. ELECTRICAL CONNECTIONS 4 - ETR-BUSCNV - TECHNICAL MANUAL...
- Page 5 5. USE BLOCK DIAGRAM The maximum management capacity of a ETR512 control unit is of 8 ETR-BUSCNV boards of which 4 can be installed as shown in the mounting figure and 4 can be installed on field; these may be installed, for example, inside the metal housing of a RIVER2 or RIVER3 concentrator or of TR8/B as shown in the following image.
- Page 6 On the other hand the communication part towards ETR control unit is operated in Slave mode by emulating a concentrators group. To do so ETR-BUSCNV shifts of 16 units the numbering existing in the peripheral trasponders of CP80, CP90, CP100 and ET8/48xx series.
- Page 7 CP8/PS, a line with address from 65 to 128 managed by another CP8/PS. The first serial line must be connected to the first ETR-BUSCNV with the four dipswitch on ON, the existing trasponders with address from 1 to 64 will be considered by ETRxxx as devices having addresses from 17 to The second line must be connected to the second ETR-BUSCNV with dipswitch n°1 on OFF and the other...
-
Page 8: Disposal Instructions
6.4. Observations ..............7 6.4.1. Connection of ETR-BUSCNV with Cp8/Tr30 and Cp8/Tr ......7 6.4.2.
Need help?
Do you have a question about the ETR-BUSCNV and is the answer not in the manual?
Questions and answers