Table of Contents
Advertisement
Displaying input signal information
You can display information on audio/video signals input
to this unit for each input source.
1
Select the desired input source, and press
mOPTION.
The option menu for the selected input source is
displayed (see page 33).
2
Press nCursor k / n to select "Signal Info,"
and press nENTER.
Information on input signals is displayed. See
page 34 on messages displayed on the front panel
display.
3
Press nCursor k / n to select the desired
item.
Dolby D
Note
• If an HDMI related error occurs, when an HDMI related error has
occurred, press nCursor to display an error message.
4
To end the information display, press
mOPTION.
Changing information on the front
panel display
Information displayed on the front panel display can be
changed by pressing CINFO (or iINFO).
The following information can be displayed according to
the input source.
For example, if you select HDMI1 input and display "DSP
Program," the following screen appears on the front panel
display.
Input source
Straight
Sound field program (DSP program)
The following information is displayed for each input
source.
HDMI1-4:
Input, DSP Program, Audio Decoder
AV1-6:
Input, DSP Program, Audio Decoder
AUDIO1-2:
Input, DSP Program, Audio Decoder
V-AUX:
Input, DSP Program, Audio Decoder
FM/AM:
Frequency, DSP Program, Audio
Decoder
iPod (Simple remote mode): Input, DSP Program, Audio Decoder
iPod (Menu browse mode):
(in PlayInfo displayed) Artist, Album,
Song, DSP Program, Audio Decoder
(in Play menu displayed) List
Bluetooth:
Input, DSP Program, Audio Decoder
Playback
23
En
Advertisement
Table of Contents
