Subscribe to Our Youtube Channel
Related Manuals for JCG JHR-N805R
Summary of Contents for JCG JHR-N805R
- Page 1 Intelligent Wireless Router JHR-N805R JHR-N825R JHR-N916R JHR-N926R Quick Installation Guide VER: 0.0.1...
-
Page 2: About This Guide
Internet and satisfies your need to watch high-definition video The JCG Intelligent Wireless Router is easy to configure, even if you are not so familiar with the router. In order to better use all functions of this product, please read this... - Page 3 Quick Installation Guide You should configure the Router correctly to ensure the normal use of the Router. This chapter describes how to configure the basic functions of the Wireless Router. We will show the detailed configuration in the next chapter. Configuring windows XP of the PC 1.
- Page 4 If the network is encrypted, password dialog box will pop up prompting you to enter key. Wireless N Router default network name(SSID) is JCG, select this network to connect the wireless router(show in figure 1-6).
- Page 5 Figure 1- 6 Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the router. If the result is similar to that show in figure 1-7, the connection between your PC and your router has been established. Figure 1- 7 If the link can not be established, please check the hardware connection between your PC and the router is normal, IP address is correct.
- Page 6 Figure 1- 9 Click on Quick Setup the button, show in figure 2-10 , the router supports five connection type to connect to Internet. Figure 2-10 Click on the Next button, show in figure 1-11, If you use the DHCP (Auto config) connection, the router will receive the IP parameters from your ISP without needing to enter any parameter, show in figure 1-11 figure 1-11...
- Page 7 ② If you use the STATIC(fixed IP) connection, the Static IP settings page will appear, show in figure 1-12, enter the Static IP address, Subnet Mask, Default Gateway and DNS figure 1-12...
- Page 8 ③ If you use the PPPoE(ADSL) connection, the PPPoE settings page will appear, show in figure 1-13, please enter the user name and the password provided by your ISP. figure 1-13 Click on the Next button, This page is used to configure the parameters for show in figure 1-14.
- Page 9 Now, Quick Installation Guide is complete.
-
Page 10: Fcc Warning
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the JHR-N805R and is the answer not in the manual?
Questions and answers