Can-Am 13582 Installation Instructions

Can-Am Maverick Trail Brush Guard w/winch mount
Includes:
1. (1) Brush Guard (13582-01)
2. (1) Mtg Bracket (13582-02)
3. (1) Cover Plate (13582-05)
Note: If you bought the option-
al color backer plate it will be
packed separately.
Hardware Kit:
1. (4) U-Bolts 3/8-16 x 1-3/4"
2. (6) 3/8 -16 x 1" Carriage Bolts
3. (14) 3/8-16 Nylon Flange Nuts
4. (1) Logo Sticker
Tools Needed:
1. 3/8" Wrench
2. 3/8" Socket
NOTE:
1. Accepts a standard
with a 4-7/8" wide x 3" deep bolt pat-
tern. We recommend the Viper Elite
3500 regular spool winch. These are
available on our website.
WWW.EXTREMEMETALPRODUCTS.COM
1.
If you purchased the optional colored
backer plate it will go between the
bumper and mounting bracket. Set this
in place before mounting your brush
guard to the bracket.
P/N: 13582
Fits: 2018 Maverick Trail
Installation Instructions:
center spool winch
Installation should be done by a
certified technician.
Installation:
1. Mount the bracket to the two
front tubes. You will want to ad-
just this up or down to make the
front of it perpendicular with the
ground. Once you have it in the
correct location tighten the nuts.
2. If you are using a winch bolt the
winch to the brush guard as
shown. Follow the directions
that came with your winch at
this time.
3. Using the carriage bolts mount
the brush guard to the bracket
and tighten the nuts.
4. Using the remaining carriage
bolts mount the Cover Plate to
the frame below to cover the
stock winch fairlead location.