Yamaha RX-A720 Quick Manual page 3

■ Zone2 setup
Use the supplied remote control to set the Zone2
function.
1
Turn on the unit and TV.
2
Switch the TV input to display video from
the unit.
3
Press ON SCREEN to display the
on-screen menu on the TV.
ON SCREEN
TOP MENU TOP MENU
POP-UP/MENU POP-UP/MENU
ON
OPTION OPTION
SCREEN
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
4
Use the cursor keys and ENTER to select
"Setup" → "Speaker" → "Manual Setup"
→ "Power Amp Assign".
5
Use the cursor keys to select
"7ch +1ZONE" and press ENTER.
6
Press ON SCREEN to exit from the
on-screen menu.
Controlling Zone2
Follow the procedure below to enable Zone2 output and
select an input source for Zone2.
1
Set MAIN/ZONE2 to "ZONE2".
This changes the zone (main zone or Zone2)
that is controlled by the remote control.
SOURCE SOURCE RECEIVER RECEIVER
RECEIVER z
HDMI HDMI
1 1 2 2 3 3 4 4
5 5 V-AUX V-AUX
AV 5–6
AV AV
AUDIO 1–2
1 1 2 2 3 3 4 4
AUDIO
TUNER
5 6 1 2
USB
NET
TUNER USB NET
MAIN ZONE 2 PARTY PARTY HDMI OUT
HDMI OUT
SCENE SCENE
MAIN/ZONE2
2
Press RECEIVER z.
Each time you press the key, Zone2 output is
enabled or disabled.
When Zone2 output is enabled, "ZONE2" lights
up in the front display.
Lights up
ZONE
2
Zone2 On
3
Use the following keys to select an input
source.
AV 5–6: AV 5–6 (AUDIO) jacks
AUDIO 1–2: AUDIO 1–2 jacks
V-AUX: (RX-A820 only)
VIDEO AUX (AUDIO) jacks (on the front panel)
TUNER: FM/AM radio
USB: USB jack (on the front panel)
NET: NETWORK jack (press repeatedly to
select a desired network source)
• You cannot select USB and network sources exclusively for
each zone. For example, if you select "SERVER" for Zone2
when "USB" is selected for the main zone, the input source for
the main zone also switches to "SERVER".
4
Start playback on the external device or
select a radio station.
For details about the playback operation, refer to
the instruction manual for the external device or
Owner's Manual on the supplied CD-ROM.
VOL.
3