Yamaha RX-A1000 Quick Reference Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-A1000
  6. Quick reference manual

Yamaha RX-A1000 Quick Reference Manual

Quick reference guide
Hide thumbs Also See for RX-A1000:

Advertisement

Table of Contents

See also: Service Manual , Owner's Manual
Quick Reference Guide
■
Accessories
The following accessories are supplied with this product.
Remote control
* The fi gure of the supplied power cable may differ depending upon regions.

Preparing the remote control

1
3
2
2
■
Items necessary for connection
Speakers
E.g.
Front speaker
• Use speakers with an impedance of at least 6Ω. 4Ω speakers can also be used as the front speakers. For more information on speaker
impedance, refer to page 3.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two front speakers. The priority of the other speakers is as follows:
1
Two surround speakers
2
One center speaker
3
One (or two) surround back speaker(s)/presence speakers
External components
TV
Batteries (2)
AM loop antenna
(AAA, R03, UM-4)
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Center speaker
Playback device such as BD
(Blu-ray Disc)/DVD players
Indoor FM antenna
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
E.g.
Surround speaker, surround back
speaker, and presence speaker
Cable
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
- 1 -
YPAO microphone
E.g.
Active subwoofer
English
for U.S.A.
Power cable*
within 20 feet (6 m)
E.g.

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-A1000

Summary of Contents for Yamaha RX-A1000

  • Page 1: Preparing The Remote Control

    Active subwoofer speaker, and presence speaker • Use speakers with an impedance of at least 6Ω. 4Ω speakers can also be used as the front speakers. For more information on speaker impedance, refer to page 3. • If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.

  • Page 2: Connect A Tv

    Connect and install as follows the fi rst time you use this unit. See the following explanations for the connections for each number. BD/DVD player (recorder) This unit Front speaker R Front Subwoofer speaker L Surround speaker R Center speaker...

  • Page 3: Connect The Speakers

    EXTRA SP EXTRA SP SINGLE setting of this unit to 6Ω. When this unit is confi gured for 6Ω speakers, 4Ω speakers can also be used as the front speakers. For more information on setting the speaker impedance, refer to “Changing speaker impedance”...

  • Page 4: Listening To Tv Audio

    SINGLE SINGLE * For details on selecting the active HDMI OUT jack, refer to “Selecting the active HDMI OUT jack” in the Owner’s Manual. When connecting to an HDMI compatible TV When connecting to a non-HDMI compatible TV...

  • Page 5: Connect The Power Cable

    Trebele:0.0dB The several settings other than ones in the above table can be assigned to the SCENE keys. For more information on the SCENE function, refer to “Changing input settings with a single key (SCENE function)” in the Owner’s Manual.

  • Page 6: Set Up The Speaker Parameters Automatically (Ypao)

    • The amount of time for measurement varies from about two to ten minutes according to settings. • The test tone is output at high volume. Refrain from using this function at night when it may be a nuisance to others.
  • Page 7 When the display at right appears, the YPAO setup is complete. Press ENTER. YPAO is terminated. Disconnect the YPAO microphone. All the preparation is completed. Enjoy the various functions provided by this unit. For details on the operations, refer to the Owner’s Manual. - 7 -...

  • Page 8: Basic Operations

    PHONO Selects a scene CATEGORY You can switch the settings such as input sources and sound fi eld programs with a single key. PRESET TUN./CH Refer to “Default scene settings” on page 5 for details on the settings assigned to this unit.

This manual is also suitable for:

Rx-a1000bl

Table of Contents