Advertisement
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead
The exclamation point within an
symbol, within an equilateral triangle,
equilateral triangle is intended to
is intended to alert you to the presence
alert you to the presence of important
of uninsulated "dangerous voltage"
operating and maintenance
within the product's enclosure that
(servicing) instructions in the
may be of sufficient magnitude to
literature accompanying the
constitute a risk of electric shock to
appliance.
persons.
IMPORTANT
Please record the serial number of this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place
for future reference.
1 Read these instructions.
10 Protect the power cord from being walked
2 Keep these instructions.
on or pinched particularly at plugs,
3 Heed all warnings.
convenience receptacles, and the point
4 Follow all instructions.
where they exit from the apparatus.
5 Do not use this apparatus near water.
11 Only use attachments/accessories specified
6 Clean only with dry cloth.
by the manufacturer.
7 Do not block any ventilation openings.
12 Use only with the cart, stand,
Install in accordance with the
tripod, bracket, or table specified
manufacturer's instructions.
by the manufacturer, or sold with
8 Do not install near any heat sources such as
the apparatus. When a cart is used, use
radiators, heat registers, stoves, or other
caution when moving the cart/apparatus
apparatus (including amplifiers) that
combination to avoid injury from tip-over.
produce heat.
13 Unplug this apparatus during lightning storms
9 Do not defeat the safety purpose of the
or when unused for long periods of time.
polarized or groundingtype plug. A
14 Refer all servicing to qualified service
polarized plug has two blades with one
personnel. Servicing is required when the
wider than the other. A grounding type
apparatus has been damaged in any way,
plug has two blades and a third grounding
such as power-supply cord or plug is
prong. The wide blade or the third prong
damaged, liquid has been spilled or objects
are provided for your safety. If the
have fallen into the apparatus, the
provided plug does not fit into your outlet,
apparatus has been exposed to rain or
consult an electrician for replacement of
moisture, does not operate normally, or has
the obsolete outlet.
been dropped.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for
future reference.
1 Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold. (Do not use/keep this unit in a car etc.)
2 Locate this unit away from other electrical appliances, motors, or transformers to avoid
humming sounds.
3 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this
unit in an environment with high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical shock, fire, damage to this unit,
and/or personal injury.
4 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be
exposed to liquid dripping or splashing. On the top of this unit, do NOT place:
− Other components, as they may cause damage and/or discoloration on the surface of this
unit.
− Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal
injury.
− Containers with liquid in them, as they may fall and liquid may cause electrical shock to
the user and/or damage to this unit.
5 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat
radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
6 Do not operate this unit upside-down. They may overheat, possibly causing damage.
7 Do not use force on switches, knobs, and/or cords.
8 When disconnecting the power cable from the wall outlet, grasp the AC plug; do not pull the
cord.
9 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry
cloth.
10 Only the voltage specified on this unit must be used. Using this unit with a higher voltage than
specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha
will not be held responsible for any damage resulting from use of this unit with a voltage other
than that specified.
11 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when
any service is needed. The cabinet should never be opened for any reason.
12 When not planning to use this unit for long periods of time (i.e. when going on vacation),
disconnect the power cable from the AC wall outlet.
13 Be sure to read the "TROUBLESHOOTING" section regarding common operating errors
before concluding that the unit is faulty.
14 Before moving this unit, disconnect the power cable from the wall outlet.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association's Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the sound come through
loud and clear without annoying blaring or distortion - and, most importantly, without affecting
your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too
late, Yamaha and the Electronic Industries Association's Consumer Electronics Group recommend
you to avoid prolonged exposure from excessive volume levels.
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE : DO NOT
Compliance with FCC regulations does not
MODIFY THIS UNIT!
guarantee that interference will not occur in
This product, when installed as indicated
all installations. If this product is found to be
in the instructions contained in this
the source of interference, which can be
manual, meets FCC requirements.
determined by turning the unit "OFF" and
Modifications not expressly approved by
"ON", please try to eliminate the problem by
Yamaha may void your authority, granted
using one of the following measures:
by the FCC, to use the product.
Relocate either this product or the device that
2 IMPORTANT : When connecting this
is being affected by the interference.
product to accessories and/or another
Utilize power outlets that are on different
product use only high quality shielded
branch (circuit breaker or fuse) circuits or
cables. Cable/s supplied with this product
install AC line filter/s.
MUST be used. Follow all installation
In the case of radio or TV interference,
instructions. Failure to follow instructions
relocate/reorient the antenna. If the antenna
could void your FCC authorization to use
lead-in is 300 ohm ribbon lead, change the
this product in the USA.
lead-in to coaxial type cable.
3 NOTE : This product has been tested and
If these corrective measures do not produce
found to comply with the requirements
satisfactory results, please contact the local
listed in FCC Regulations, Part 15 for
retailer authorized to distribute this type of
Class "B" digital devices. Compliance
product. If you can not locate the appropriate
with these requirements provides a
retailer, please contact Yamaha Electronics
reasonable level of assurance that your
Corp., U.S.A. 6660 Orangethorpe Ave,
use of this product in a residential
Buena Park, CA 90620.
environment will not result in harmful
The above statements apply ONLY to those
interference with other electronic devices.
products distributed by Yamaha Corporation
This equipment generates/uses radio
of America or its subsidiaries.
frequencies and, if not installed and used
according to the instructions found in the
users manual, may cause interference harmful
to the operation of other electronic devices.
FCC WARNING
Change or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
FOR CANADIAN CUSTOMERS
This Class B digital apparatus complies with Canadian ICES-003.
15 Be sure to use the AC adaptor supplied with this unit. Using an AC adaptor other than the one
provided may cause fire or damage to this unit.
16 Install this unit near the wall outlet and where the power cable can be reached easily.
17 For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the
product due to lightning and power-line surges.
18 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
– Keep the batteries in a location out of reach of children. Batteries can be dangerous if a
child were to put in his or her mouth.
– If the batteries grow old, the effective operation range of the remote control decreases
considerably. If this happens, replace the batteries as soon as possible.
– Do not use old batteries together with new ones.
– Do not use different types of batteries (such as alkaline and manganese batteries) together.
Read the packaging carefully as these different types of batteries may have the same shape
and color.
– Exhausted batteries may leak. If the batteries have leaked, dispose of them immediately.
Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean
the battery compartment thoroughly before installing new batteries.
– If you plan not to use the unit for a long period of time, remove the batteries from the unit.
Otherwise, the batteries will wear out, possibly resulting in a leakage of battery liquid that
may damage the unit.
– Do not throw away batteries with general house waste. Dispose of them correctly in
accordance with your local regulations.
There is a chance that placing this unit too close to a CRT-based (Braun tube) TV set might
impair picture color. Should this happen, move this unit away from the TV set.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
Even if an iPhone or iPod is not connected to this unit, this unit is not disconnected from the
AC power source as long as it is connected to the wall outlet. In this state, this unit is designed
to consume a very small quantity of power.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
TROUBLESHOOTING
Refer to the table below if the unit does not operate properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, turn off the unit,
disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.
Situation
No sound
Even if the volume level is raised, the sound level does not increase.
Even if the volume level of the connected iPhone/iPod is changed, the
sound level does not change.
The iPhone/iPod cannot be controlled using the remote control.
PDX-11 cannot be controlled using the remote control.
When PDX-11 is used outdoors, the remote control's operating range
becomes smaller.
The green status indicator is lit, and the red status indicator blinks for 2
seconds only.
The green status indicator is lit, and the red status indicator is blinking
quickly.
The green status indicator is lit, and the red status indicator is blinking
slowly.
PDX-11 does not operate at all.
SPECIFICATIONS
Supported iPod ............................ iPod touch (1st, 2nd, 3rd and 4th generations), iPod classic, iPod with video,
iPod nano (1st, 2nd, 3rd, 4th, 5th and 6th generations)
Supported iPhone ............................................................................... iPhone 4, iPhone 3GS, iPhone 3G, iPhone
AUX
Input connector ............................................................................... ø 3.5 mm (1/8 in.) stereo mini jack
Power supply
U.S.A. and Canada models ......................................................................................... AC 120 V, 60 Hz
Other models ............................................................................................... AC 100 to 240 V, 50/60 Hz
Power consumption ......................................................................................................................................... 8 W
Power consumption when power off and the iPhone/iPod is disconnected ...................................... 0.5 W or less
AC Adaptor ..............................................................................................MU18-D120150-A1 (DC 12 V, 1.5 A)
Battery supply ....................................................................................................................... LR6, AA, UM-3 × 6
8 hours of power at 0.18 W output (Alkaline Battery)
Dimensions
210 mm
(8-1/4 in.)
237 mm
(9-3/8 in.)
* To play an unsupported iPod, such as a 4th generation (or earlier) iPod, iPod shuffl e, iPod photo, and iPod
mini, connect the iPod to AUX and use it as an external device.
* Specifi cations are subject to change without notice.
* The name plate is located on the bottom of the unit.
Remedies and Points to Confi rm
•
Is the iPhone/iPod connected securely to the iPod dock?
•
Are PDX-11 and the external device's connector cable connected securely? Are the
connector cable and the external device connected securely?
•
Is the AC adaptor connected securely?
•
Push the
to turn on PDX-11.
•
Is the volume turned down?
•
Have the batteries in PDX-11 been exhausted?
It is possible that the protection circuitry has been activated by excessive volume. Reduce the
volume level.
•
Is the connected iPhone/iPod compatible with PDX-11?
(☞"SPECIFICATIONS")
•
Is the iPhone/iPod connected securely to the iPod dock?
•
If PDX-11 is being operated by batteries, it is possible that power-saving mode has been
activated. (☞"Before Use")
•
Are you outside of the remote control operating range?
•
Has the remote control's battery been exhausted, or is it
inserted incorrectly?
•
Has the insulation sheet been removed?
The remote control's operating range changes depending on the operating environment (amount
of lighting, sunlight, etc.).
Is the connected iPhone/iPod compatible with PDX-11?
Use a supported iPhone/iPod. (☞"SPECIFICATIONS")
•
Is the iPhone/iPod connected securely to the iPod dock?
•
Restart the iPhone/iPod.
•
Update the iPhone/iPod fi rmware to the latest version.
Have the PDX-11's batteries been exhausted?
In some cases, resetting PDX-11 can solve the problem.
To reset PDX-11, push and hold the
on the control panel for 10 seconds or more.
"Made for iPod" and "Made for iPhone"
mean that an electronic accessory has been
designed to connect specifi cally to iPod or
iPhone, respectively, and has been certifi ed
by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the
use of this accessory with iPod or iPhone
may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano,
iPod touch and iTunes are trademarks of
Apple Inc., registered in the U.S. and other
countries.
237 mm
(9-3/8 in.)
Weight : 1.5 kg (3.3 lbs)
(☞"
Playing Audio")
Advertisement
