Advertisement
Timer Control
To start and stop the timer, press the Timer button (TIME) on the remote control or on the control panel to
cycle through the timer settings (0.5, 1, 2, 4 hrs). The appropriate LED light on the front of the fan will light
up when the function is activated.
Natural Breeze Settings
• Setting 1: Push the MODE button once on the remote control or on the control panel. The fan speed will
automatically vary from faster to slower. The appropriate LED light on the front of the fan will light up
when the function is activated.
• Setting 2: Press the MODE button again to activate this setting. This function varies the fan speed from fast
to slow and the fan gradually stops before repeating the process. The appropriate LED light on the front
of the fan will light up when the function is activated.
• Natural Breeze OFF: Press the MODE button a 3rd time to switch off the Natural Breeze function. Normal
air circulation continues and no indicator lights will be lit.
CLEANING
Important! Always unplug the power cord before cleaning. The fan can be wiped with a damp cloth now
and then. Never use abrasive or corrosive detergents. Never clean with scouring powder or scouring
sponges. Allow to fully dry before using. The motor bearings are permanently sealed and do not require
additional lubrication.
Warning! Never immerse the fan in water or other liquid.
English
4
Advertisement
