Advertisement
• Do not attempt to open any part of the Motor Housing.
• Do not immerse the Motor Housing, Cord, or Plug in, or expose them to, water or
other liquids.
• Do not use outdoors, this product is intended for indoor use only.
• This product is intended for HOUSEHOLD USE ONLY and not for commercial or
industrial use.
READ AND SAVE THESE INSTRUCTIONS
CAUTION: This product is equipped with a polarized plug (one blade is wider
than the other blade) as a safety feature to reduce the risk of electrical
shock. This plug will fit into a polarized outlet only one way. This is a
safety feature. If you are unable to insert the plug into the electrical
outlet, try reversing the plug. Do not alter the plug. Do not attempt to
defeat the safety purpose of the polarized plug.
CAUTION: If using an extension cord with this product, the marked electrical
rating of the cord set or extension cord should be at least as great as
the electrical rating of the product. Never use the plug with anextension
cord unless the plug can be fully inserted into the extension cord.
Assembly Instructions
1. Remove all contents from the box, being careful not to discard the manual and
hardware needed for assembly.
2. Pass the power cord through the channel of the stand, and firmly clasp the two
halves of the stand together. Insert the base into the bottom of the housing being
careful to align the corresponding holes.
3. Gently turn the fan upside down, with the top of the fan touching the floor. Screw
the stand into the bottom portion of the fan housing (fig. 1), by using the 2 thumb
screws that come with the fan. Screw the stand with the bases by 4 screws (fig. 2)
and finally, fix the bases by the rest of the screws (fig. 2).
4. To reduce movement of the power cord during use or transportation, place the
power cord through the cut out on the bottom of the base (fig. 3).
5. Place the fan right side up and it is ready to use.
English
2
Advertisement
