Page 2
BT 5330 IP Phone Handset Menu Keys Display Ring/Message Indicator Feature Keys Dialpad Navigation Keys Programmable Keys External Speaker Handset: The handset is hearing aid compatible (HAC). When using headset or in Hands-free mode, you need not use the handset.
Page 3
There are 5 keys on each of the three pages. All keys are pre-programmed as Outgoing Lines. They can be reprogrammed as features. (e.g. Speed Dial). External Speaker: Provides audio for Hands-free calls and background music. Using your BT 5330 Phone Select Internal call from Display and Placing Emergency Calls Select extension.
Page 4
Setting Do Not Disturb When set, callers receive busy signal. Personal Speed Dial Page through Display screens Storing Speed Dial Numbers Select Do not disturb Page through Display screens To cancel Do Not Disturb Select Directories Select Cancel DND. Select Personal Entries Enter the Index number (01 –...
Page 5
(Not applicable with remote mailbox access) For more information about using phone features and programming feature keys, refer to your System Administrator for copies of the BT Quantum User Guide and BT Quantum Administration Guide.
Safety Instructions and Precautions WARNING: Do not connect directly to the public switched telephone network (PSTN). Any connection of this phone to an off premise application, an out of plant application, any other exposed plant application, or to any equipment other than the intended application may result in a safety hazard, and/or defective operation, and/or equipment damage.
Page 7
The CE marking on this equipment Printed in China. indicates compliance with the following: This device confirms to Directive Part No. 57011416CN DOC BT 5330 Quick Reference Guide Rev3 1999/5/EC on Radio Equipment and Telecommunications Terminal equipment Printed on paper which meets international environmental as adopted by the European Parliament standards.
Need help?
Do you have a question about the BT 5330 and is the answer not in the manual?
Questions and answers