Gaide Intelligent Technology GD01 Manual page 5

4. Press button definition
GD01 uses independent press button, in total three
buttons:
+
UP
" "
5. Operation instructions
1) Power ON/OFF
When the power is off, Long press
seconds ， screen will display all contents and start to normal
working mode, and controller will be turned on When the power is
M
on, Long press
powered off， and controller will be turned off . If no any operation
both on bike and display during 10 minutes (time could be set), the
display will turn off automatically , in this case, no power
consumption for both display and controller.
2) Different Speed display:
+
Long press and
time speed（ SPEED）
3)ODO/TRIP/ Driving Time/Error Code
M
Short press
ODO(Accumulated distance)
distance)→ Driving Time
TM(
M
Power
" "
（ Power） during 3 seconds， screen will be
M
o switch different speed information， Real
to switch ODO/TRIP/ Driving Time/Error Code
Trip(Single trip
→
)→ERR(Error Code)。
-
DOWN
" "
M
（ Power） during 3
4