Panasonic KX-TG994SK Operating Instructions Manual
Cordless phone with advanced call block
Hide thumbs
Also See for KX-TG994SK:
- Operating instructions manual (116 pages) ,
- Basic operating instructions manual (33 pages) ,
- Quick manual (12 pages)
Table of Contents
Advertisement
Quick Links
Model shown is KX-TG994SK.
Before initial use, see "Getting Started"
on page 12.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte "Guía Rápida Española", página 100.
For assistance, visit our Web site: http://shop.panasonic.com/support for
customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
Operating Instructions
Cordless Phone
KX-TGF973
Model No.
KX-TG994SK
KX-TGF975
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the KX-TG994SK and is the answer not in the manual?
Questions and answers
How do I delete old messages
To delete old messages on the Panasonic KX-TG994SK:
Using the base unit:
1. Make sure the unit is not in use.
2. Press ERASE two times to erase all messages.
Using the handset:
1. Press MENU, then press #325.
2. Select “Yes” and press SELECT to confirm.
This answer is automatically generated
Can I add another handset. I have 4 now. Can I go up to six handsets?
Yes, the Panasonic KX-TG994SK can support up to six handsets.
This answer is automatically generated
Is it possible to activate talk feature without pushing down the button?
Yes, the talk feature can be activated without pressing the button by using the "answer by voice command" feature. When this feature is set to "On," the unit can answer incoming calls using voice detection.
This answer is automatically generated
How can you set the KX-TG994SK system to ring more than 3 times. When a call comes in, the handset lights up and then 3 rings occur before going to the recording. If you are away from the phone you cannot answer the phone in the specified time.
To increase the ring duration on the Panasonic KX-TG994SK before it goes to voicemail, adjust the number of rings before the answering system picks up. This setting is typically found in the menu under answering system settings. Look for an option like "Number of Rings" and set it to a higher value. This will delay when the system answers the call, effectively increasing the ring duration.
This answer is automatically generated
I can not set the number of ring before the unit answers. I set it to three but it will still ring 7 times
You can change the number of rings before the Panasonic KX-TG994SK answers a call by adjusting the "Ring count" setting. You can select between 2 to 7 rings or choose the "Toll saver" option. The default setting is 4 rings. "Toll saver" answers on the 2nd ring if there are new messages or on the 5th ring if there are none.
This answer is automatically generated
CAN'T RECEIVE CALLS
The Panasonic KX-TG994SK may not be receiving calls due to several possible reasons:
1. Power Issues: Ensure the AC adapter is properly connected to the base unit.
2. Telephone Line Connection: Check that the telephone line cord is securely connected.
3. Battery Issues: Use only rechargeable Ni-MH batteries, as alkaline, manganese, or Ni-Cd batteries are not supported.
4. Call Blocking Settings: If call blocking is enabled, some calls may not ring. Adjust settings under the call block/unblock menu.
5. First Ring Setting: If the phone is not ringing on the first ring, enable the "Ring Once" option by pressing Menu > #173 > Yes.
6. Troubleshooting Guide: Refer to the troubleshooting section in the user manual for additional solutions.
If the problem persists, consider resetting the device or checking for service issues with the phone line provider.
This answer is automatically generated
How to change batteries in hand set
Change batteries in hand sets
I set the date and time on my phone correctly, but when I receive a call it changes to some other date and time.
My Panasonic KX-TG994SK the answer machine answers after 3 rings. If I set the ring number to 7 then a message comes up the customer is not available call back later after 3 rings. How can I increase the rings to a higher amount with the answer machine and my recorded message? I have tried many times and it just will not work as the 3 rings seem to be set for the answer machine to work. I just want the answer machine to work after 6 to 7 rings.