Starting - Beko ZA635FW Installation, Operation And Food Storage Instructions

STARTING

Final Check
Before you start using the fridge/freezer check that:
1. The feet have been adjusted for perfect levelling.
2. The interior is dry and air can circulate freely at the rear of the cabinet.
3. Clean the interior as recommended under "CLEANING AND CARE."
4. Insert the plug into the wall socket and switch on the electricity supply.
5. You will hear a noise as the compressor starts up. The liquid and gases sealed
within the refrigeration system may also give rise to noise, whether the
compressor is running or not which is quite normal.
"Due to operation of the fan, overall noise level is slightly higher in comparison to non-
frost free appliances. This is quite normal and is not a fault."
6. Set the setting knob half way between 1 and 4.
7. Front edges of the cabinet may feel warm. This is normal. These areas are designed to
be warm to avoid condensation.
8. "Do not load the appliance immediately it is switched on. Wait until the correct storage
temperature has been reached. We recommend that you check the temperature with
an accurate thermometer (see; Temperature Control and Adjustment)"
9. When the freezer reaches the desired temperature the freezer fan will stop. When the
freezer fan is on, the noise will be louder when the freezer door is opened.
10. Avoid spillage of food particularly small items like rice, peas, beans through the fan
guard as they may cause the cooling system to block and therefore operate less efficiently.
8