Table of Contents
Advertisement
Driver Installation
Windows 2000
D-Link offers an NDIS 5.0 32-bit Miniport driver for the DGE-550SX network adapter
supporting Windows 2000. To install the driver, proceed as follows:
1.
After you have installed the network adapter in your computer, boot
Windows 2000.
Windows 2000 detects the DGE-550SX network adapter as "Ethernet Controller"
during the boot operation. The window "Found New Hardware Wizard" is dis-
played.
2.
Click N
.
EXT
In the same window the menu "Install Hardware Device Drivers" is displayed.
3.
Select the check box Search for a suitable driver for my device (recommended).
4.
Click N
.
EXT
The menu "Locate Driver Files" is displayed.
5.
Select the source from which the driver is to be installed.
6.
Type the path to the driver.
7.
Click O
.
K
8.
Click N
.
EXT
The menu "Driver Files Search Results" is displayed, listing the found driver and
its location.
9.
To install the driver, click N
In case the driver does not have a Microsoft Digital Signature yet, the window
"Digital Signature Not Found" is displayed.
10. To continue the installation, click Y
The window "Completing the Found New Hardware Wizard" is displayed.
11. Click F
INISH
Windows XP and Windows Server 2003, 32-bit Systems
D-Link offers an NDIS 5.1 32-bit Miniport driver for the DGE-550SX network adapter
supporting Windows XP and Windows Server 2003. The installation procedure for
Windows XP and Windows Server 2003 is identical. It is described for Windows
Server 2003.
To install the driver, proceed as follows:
1.
After you have installed the network adapter in your computer, boot Windows
Server 2003.
The window "Welcome to Found New Hardware Wizard" is displayed. On the
screen the menu "Can Windows connect to Windows Update to search for soft-
ware" is displayed.
EXT
to complete the installation.
.
.
ES
- 5 -
Advertisement
Table of Contents
