Table of Contents
Advertisement
Avoiding Damage
CAUTION: Electrostatic Discharge!
Electrostatic discharge may damage or destroy the network adapter.
To avoid damaging the network adapter:
•
Put on an antistatic wrist strap (electrically conductive) and connect it to the com-
puter chassis before handling the network adapter.
Do not connect the wrist straps to the ground terminal of the power supply! Faulty
wiring could make this terminal live and potentially lethal.
•
If you need to place the network adapter somewhere after removing it from the
antistatic bag, make sure that you place it on the antistatic bag and on a level sur-
face. Do not place the network adapter on the computer cover or on any other
metal surface.
•
Do not touch any circuits on the network adapter or any of its port contacts.
Minimum System Requirements
Your computer should support:
®
•
Windows
XP SP2,
Windows 2000 SP4,
or Windows 2003
•
CD-ROM Drive
•
20 MB Hard Disk Space
•
32-bit PCI Slot
LED Indicators
The D-Link DGE-550SX PCI-X 1000Base-SX Network Adapter features 2 LED indica-
tors:
•
Link Indicator (LINK: Link up/down, 1000Mbps)
This indicator lights green when the 1000Base-SX SC fiber port is connected to
an Ethernet network (link up).
•
Activity Indicator (ACT: Transmitting/Receiving)
When this indicator is blinking green, the network adapter is transmitting/receiv-
ing data to/from the Ethernet Network.
1. Computer must adhere to Microsoft's recommended System Requirements. Please contact Microsoft for
details.
1
- 3 -
Advertisement
Table of Contents
