Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hanwha Vision SPA-M2000
Summary of Contents for Hanwha Vision SPA-M2000
- Page 1 SIP MICROPHONE User Manual SPA-M2000...
- Page 2 ※ Appearance, specification, etc. of the product is subject to change for performance improvements without prior notice. The latest update is available on the official Hanwha Vision website. (www.HanwhaVision.com) ※ The ID for the initial login is “admin, ” and a password should be set.
- Page 3 overview WARNING CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Page 4 overview IMPORTANT SAFETY INSTRUCTIONS 22. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. 1. Read these instructions. 23. Do not place this apparatus near conductive material. 2. Keep these instructions. 24.
-
Page 5: Table Of Contents
CONTENTS OVERVIEW Important Safety Instructions STARTING Connecting to a PC Features Access product Broadcast System Configuration Diagram Logging in Checking the components Names and functions of each part ENVIRONMENT SETTINGS Home Screen configuration Operation Settings Maintenance INSTALLING AND CONNECTING Installation System management Connecting to other devices Network settings... -
Page 6: Features
overview FEATURES BROADCAST SYSTEM CONFIGURATION DIAGRAM This product is a SIP microphone that is to be connected to the controller device (e.g., audio ~ Paging communication over the network server, speaker/audio module set to controller mode) of the network audio system. You can broadcast a variety of messages, such as announcements to a designated area within the network, To use the microphone, you must connect it to the network and register a device via a web- using the paging system by connecting it to a network audio server or controller mode speaker. -
Page 7: Checking The Components
CHECKING THE COMPONENTS IP PBX Linkage Block Diagram You can broadcast voice to each speaker with a VoIP phone which uses the SIP protocol by using the IP Make sure all of the following components are included. PBX server. (Accessories may vary by sales region.) IP PBX IP Speakers (wall-mount type/Horn type) PUSH... -
Page 8: Names And Functions Of Each Part
overview NAMES AND FUNCTIONS OF EACH PART Name Function Description Front ALL button The button used to select all broadcast regions. The button used to sound a chime to signal the start or end of a broadcast. CHIME button For information on how to set up a chime, refer to "Chime Settings". (Page 27) When entering numbers, if 8 or more numbers have already been entered, they cannot all NEXT button PUSH... - Page 9 Rear DC 24V POWER RESET NETWORK AUX IN MIC VOL a b c Name Function Description POWER input terminal Supplies DC 24V power by connecting to the supplied power adapter. A button that returns the product settings to the factory default values. Press the button for approximately 12 seconds to reset and reboot the product.
-
Page 10: Installing And Connecting
installing and connecting INSTALLATION Disconnecting from the Gooseneck Microphone Disconnect the gooseneck microphone from the device while pressing the <PUSH>button on top of the gooseneck microphone. Precautions Before Installation ~ Be careful that cables do not become stuck in the wrong places and that the covering of electric wires is not damaged, as this can cause product damage or fire. -
Page 11: Connecting To Other Devices
CONNECTING TO OTHER DEVICES Network Cable Specifications Item Specifications Remark Connector RJ45 (10/100BASE-T) Ethernet 10/100Base-T DC 24V Cable Category 5e Max Distance 100 m DC resistance ≤ 0.125 Ω/m POWER RESET NETWORK AUX IN MIC VOL PoE Support IEEE 802.3af Power Router or switching hub (PoE supported) -
Page 12: Connecting To A Pc
starting You can set the product’s network environment according to the user’s network connection ACCESS PRODUCT configuration. Various functions, including maintenance and environment settings, are available on the product website. To change your product’s network configuration settings, follow these instructions to access the product. - Page 13 ~ The DNS server address is automatically set as the product’s initial DNS address (DNS1 8.8.8.8, DNS2 8.8.4.4). The Device Manager Program ( ) is available on the official Hanwha Vision website (https://www.HanwhaVision.com) by clicking <Support> - <Online Tool>. When you select multiple products ~ Select <Assign the following IP address>...
- Page 14 Select the searched product in the Device Manager and run <FW Status Check> in the [FW] menu to get the firmware status (the latest or previous version). Check the firmware distribution information for each product on the Hanwha Vision website (https://www.HanwhaVision.com) and download the latest firmware (modelname_version.imkp) to your PC.
-
Page 15: Logging In
LOGGING IN Registering with the product’s initial IP address If you connect only one product to the switch hub, it is possible to set up the password even on the web Use the password set for the admin account. page. 1. -
Page 16: Home Screen Configuration
Shows the language options supported on the website. (Korean, English supported) authentication is attempted regularly. If you click <Hanwha>, the screen will move to the Hanwha Vision Official Website. 2. When you [save] <SIP Account Information>, the registered <User ID> information is displayed on the <SIP Account List>. - Page 17 3. Set whether to use the account as the default account or not. SIP shortcut key settings When you check the account’s [Default] on the <SIP Account List>, it will be sent from/received to that account. The account’s [Status] is activated and [detailed information of the status] is also changed from Idle to Registered, and it is displayed as Online Devices in the IP PBX web page’s Extensions menu.
-
Page 18: Maintenance
The Log menu will appear on the View Log when its function is activated. 3. Select the upgrade file (model name_version.imkp) that you downloaded from the official Hanwha Vision ~ The logs of each menu are queried up to 1000 lines, and if they exceed 1000 lines, the oldest logs are website (https://www.HanwhaVision.com) in advance and click [Open]. - Page 19 5. It will take up to 10 minutes to upgrade the system and reboot the product. Unlock Account The software version information of the product is available in the upper-right corner of the Home screen. For all accounts except the admin account, if you enter the wrong password more than 5 times when logging in, the account will be locked for 30 seconds and you will not be able to log in.
- Page 20 environment settings Setting the System Check Time Restarting System Sets the time for the system check. The system reboots automatically at the set time every day. You can restart the system without disconnecting the power when a system reboot is needed. 1.
-
Page 21: Network Settings
NETWORK SETTINGS Applying Background Images 1. On the Home screen, click <Environment Setting> <System Management>. You can change the network settings according to the user’s network connection configuration. 2. Under <Background Image>, press the [ ] button to select an image file, then click the [Apply] 1. -
Page 22: Time Settings
environment settings TIME SETTINGS 2. Click [Apply] to apply the set Time and Date information. If the product is used in a local network environment without an external Internet connection, the time information Set the time and date accurately or it may cause problems in operating the broadcast. may become incorrect due to the product’s accumulated time errors. -
Page 23: Snmp Action Settings
SNMP ACTION SETTINGS HTTPS SETTING The SNMP protocol allows system or network administrators to remotely monitor and configure the network Select a secure connection system. When you complete the configuration, click the [Apply] button. devices. 1. On the Home screen, click <Environment Setting> <HTTPS Setting>. -
Page 24: Power On
By pressing the <MENU> button on the main body of the product, it will be divided into 4 modes according to the <3. Talk Protocol> setting in the <Talk type> menu as follows. You can switch each mode with the [PRESET] button on the product body. SPA-M2000 CP Mode CALL STATION If <Talk Protocol>... -
Page 25: Broadcasting
1. If you press any number button while on the standby screen, the broadcasting mode (Zone, Group, CP, SIP) set in <Talk Protocol> and the entered number will be displayed on the screen. Request talk TALK SPA-M2000 Zone Mode ZONE Waiting . . . -
Page 26: Using Cp Event Button
CP event button (5 key) on the left side of the microphone. 1. Press the desired CP event button on the standby screen. Request talk TALK Waiting . . . PUSH MONITOR CHIME SPA-M2000 CP Mode POWER NETWORK -6dB +3dB +6dB VOLUME... -
Page 27: Using The Sip Shortcut Keys
1. Press the desired SIP shortcut key on the standby screen. Each time the [MENU] button is pressed, <Start Chime Set> <End Chime Set> <Talk type> Network Information the Firmware Information screen will switch sequentially. PUSH MONITOR CHIME SPA-M2000 SIP Mode POWER NETWORK -6dB +3dB +6dB Chime Settings... - Page 28 using the microphone Talk Type Settings 4. Press the [PREV]button to exit the <Talk Protocol>settings. You can set the [TALK]button usage method when making a microphone broadcast. On the standby screen, press the [PRESET] button on the microphone body to switch the <Talk Protocol>method. 1.
- Page 29 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Hanwha Vision cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Need help?
Do you have a question about the SPA-M2000 and is the answer not in the manual?
Questions and answers