Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hanwha Vision SPA-M1000
Summary of Contents for Hanwha Vision SPA-M1000
- Page 1 IP MICROPHONE User Manual SPA-M1000...
- Page 2 ※ Appearance, specification, etc. of the product is subject to change for performance improvements without prior notice. The latest update is available on the official Hanwha Vision website. (www.HanwhaVision.com) ※ The ID for the initial login is “admin, ” and a password should be set.
- Page 3 overview WARNING CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Page 4 overview IMPORTANT SAFETY INSTRUCTIONS Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Read these instructions. Do not place this apparatus near conductive material. Keep these instructions. Do not attempt to service this apparatus yourself. Heed all warnings.
-
Page 5: Table Of Contents
CONTENTS OVERVIEW Important Safety Instructions STARTING Connecting to a PC Features Access product Checking the components Logging in Names and functions of each part INSTALLING AND CONNECTING ENVIRONMENT SETTINGS Installation Home Screen configuration Connecting to other devices Maintenance System management Network settings Time settings USING THE MICROPHONE... -
Page 6: Features
overview FEATURES ~ Paging communication over the network You can broadcast a variety of messages, such as announcements to a designated area within the network, using the paging system by connecting it to a network audio server or controller mode speaker. ~ Gooseneck microphone You can use the gooseneck microphone conveniently by adjusting its position flexibly to fit a user environment. -
Page 7: Checking The Components
CHECKING THE COMPONENTS This product is a network microphone that is to be connected to the controller device (e.g., audio server, speaker/audio module set to controller mode) of the network audio system. To use the microphone, you must connect it to the network and register a device via a web- Make sure all of the following components are included. -
Page 8: Names And Functions Of Each Part
overview NAMES AND FUNCTIONS OF EACH PART Name Function Description The button used to sound a chime to signal the start or end of a broadcast. Front CHIME button For information on how to set up a chime, refer to "Chime Settings". (Page 24) When entering numbers, if 8 or more numbers have already been entered, they cannot all NEXT button be displayed on a single screen, so this button is used to return to the previous page. - Page 9 Rear DC 24V POWER RESET NETWORK AUX IN MIC VOL a b c Name Function Description POWER input terminal Supplies DC 24V power by connecting to the supplied power adapter. A button that returns the product settings to the factory default values. Press the button for approximately 12 seconds to reset and reboot the product.
- Page 10 installing and connecting INSTALLATION Disconnecting from the Gooseneck Microphone Disconnect the gooseneck microphone from the device while pressing the <PUSH>button on top of the gooseneck microphone. Precautions Before Installation ~ Be careful that cables do not become stuck in the wrong places and that the covering of electric wires is not damaged, as this can cause product damage or fire.
-
Page 11: Connecting To Other Devices
CONNECTING TO OTHER DEVICES Network Cable Specifications Item Specifications Remark Connector RJ45 (10/100BASE-T) Ethernet 10/100Base-T DC 24V Cable Category 5e Max Distance 100 m DC resistance ≤ 0.125 Ω/m POWER RESET NETWORK AUX IN MIC VOL PoE Support IEEE 802.3af Power Router or switching hub (PoE supported) -
Page 12: Connecting To A Pc
starting You can set the product’s network environment according to the user’s network connection ACCESS PRODUCT configuration. Various functions, including maintenance and environment settings, are available on the product website. To change your product’s network configuration settings, follow these instructions to access the product. - Page 13 ~ The DNS server address is automatically set as the product’s initial DNS address (DNS1 8.8.8.8, DNS2 8.8.4.4). The Device Manager Program ( ) is available on the official Hanwha Vision website (https://www.HanwhaVision.com) by clicking <Support> - <Online Tool>. When you select multiple products ~ Select <Assign the following IP address>...
- Page 14 You can update to the latest firmware for the product using the device manager. Check the firmware distribution information for each product on the Hanwha Vision website (https://www.HanwhaVision.com) and download the latest firmware (modelname_version.imkp) to your PC. You can also download the latest firmware to your PC from Device Manager.
-
Page 15: Logging In
LOGGING IN Registering with the product’s initial IP address If you connect only one product to the switch hub, it is possible to set up the password even on the web Use the password set for the admin account. page. 1. -
Page 16: Home Screen Configuration
Language Shows the language options supported on the website. (Korean, English supported) If you click <Hanwha>, the screen will move to the Hanwha Vision Official Website. Go to the Official Website Before using the product, please check the latest firmware version on the Hanwha Vision website (https://www.HanwhaVision.com). -
Page 17: System Management
5. The password of the setup, user, and guest accounts can be set, changed, or reset from the admin account if they are forgotten. 3. Select the upgrade file (model name_version.imkp) that you downloaded from the official Hanwha Vision website (https://www.HanwhaVision.com) in advance and click [Open]. - Page 18 environment settings Unlock Account Setting the System Check Time For all accounts except the admin account, if you enter the wrong password more than 5 times when logging Sets the time for the system check. The system reboots automatically at the set time every day. in, the account will be locked for 30 seconds and you will not be able to log in.
-
Page 19: Network Settings
NETWORK SETTINGS Restarting System You can restart the system without disconnecting the power when a system reboot is needed. You can change the network settings according to the user’s network connection configuration. 1. On the Home screen, click <Environment Setting> ; <Network Setting>. 1. -
Page 20: Time Settings
environment settings TIME SETTINGS If the product is used in a local network environment without the external Internet connection, Daylight Saving Time Set the time and date accurately or it may cause problems in operating the broadcast. is not automatically reflected as it is not synchronized with an external time server. In countries where Daylight Saving Time is applicable, it is recommended for the system administrator to use the 1. -
Page 21: Power On
By pressing the <MENU> button on the main body of the product, it will be divided into three modes according to the <3. Talk Protocol> setting in the <Talk type> menu as follows. You can switch each mode with the [PRESET] button on the product body. SPA-M1000 CP Mode CALL STATION If <Talk Protocol>... -
Page 22: Broadcasting
1. If you press any number button while on the standby screen, the broadcasting mode (Zone, Group, CP) set in <Talk Protocol> and the entered number will be displayed on the screen. Request talk TALK Waiting . . . SPA-M1000 Zone Mode ZONE ENTER NUM: 2 CALL STATION... -
Page 23: Using Cp Event Button
CP event button (5 key) on the left side of the microphone. 1. Press the desired CP event button on the standby screen. Request talk TALK Waiting . . . PUSH MONITOR CHIME SPA-M1000 CP Mode POWER NETWORK -6dB +3dB +6dB VOLUME... -
Page 24: Using Menu
using the microphone USING MENU Talk Type Settings You can set the [TALK]button usage method when making a microphone broadcast. If you press the [MENU] button on the product body, you can change the <Chime> and <Talk type> settings, or 1. - Page 25 Checking Network Information You can check the network information set in the product. 1. Press the [MENU] button on the product body. 2. The <NETWORK> information screen will be displayed. NETWORK : XXX.XXX.XXX.XXX MASK: XXX.XXX.XXX.XXX MENU DNS : 8.XXX.XXX.XXX MAC: XX:XX:XX:XX:XX:XX MENU:NEXT PREV:EXIT 3.
- Page 26 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Hanwha Vision cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Need help?
Do you have a question about the SPA-M1000 and is the answer not in the manual?
Questions and answers