Teletype 32 Adjusting Instructions

MODEL 32
G. ADJUSTING UNIFORMITY OF PRINTED CHARACTERS
J. Fig. 32-50 shows that the printed characters are not
uniform.
2. Use tool #180588 to adjust typewheel according to Fig.
32-51. Tighten and try a few printed letters and check.
Several attempts may be required to achieve desired results.
3. If steps 1 and 2 above do not achieve desired results, refer
to Figo 32-52 for adjustment instructions and to Fig. 32-53
for location of adjustment points.
, ",. r
r ", .•
l
f ~
I ! ( I ~
Y
!
I
:> ! \
! t,
t
~ ~ ~ ~ ~ ~ ~ :: ~ : c (, (, ( c. (
<
c (,
< < ( (
<
t (
~»»»»);;;;;;;;;;;;;;;;>
n
(J
f f ( •.
J •.'H H
(f(
f ~
1{H,.
't L
H:t/!'f"ift;(
M32-37