Bosch WTH83V0LSN User Manual And Installation Instructions page 38

en Troubleshooting
Fault
The laundry is too
damp.
Creasing.
Water is leaking from
the appliance.
38
Cause and troubleshooting
The dryness level is not adjusted.
Adjust the dryness level. → Page 31
▶
The load is too small.
Set a time programme for subsequent drying.
▶
→ Page 22
The moisture sensor is dirty.
Clean the moisture sensor. → Page 34
▶
The appliance has interrupted the drying process due
to the condensation container being full.
Empty the condensation container. → Page 30
▶
The selected programme is unsuitable for the type of
fabric.
Set a suitable programme. → Page 21
▶
The load is unsuitable.
Observe the programme's maximum load capacity.
▶
→ Page 21
Prepare the laundry. → Page 25
▶
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Easy Care fabrics have been dried for too long.
Change or adjust the dryness level. → Page 31
▶
The crease-reduction function is not activated.
Activate the crease-reduction function. → Page 19
▶
Appliance is not correctly aligned.
Align the appliance. → Page 14
▶
The seal for the heat exchanger cover is dirty.
Clean the seal for the heat exchanger cover.
▶
→ Page 28
Water outlet hose is not connected correctly.
Check the installation of the water outlet hose.
▶
The lever for the heat exchanger cover is not closed
correctly.
Ensure that the lever for the heat exchanger cover
▶
is closed correctly. → Page 34