Energy Saving Mode; Installation And Connection; Unpacking The Appliance; Contents Of Package - Bosch WTH83V0LSN User Manual And Installation Instructions

en Installation and connection
¡ Do not exceed the programme's
maximum load capacity. Pro-
grammes → Page 21
¡ After drying, clean the lint screen.
→ "Cleaning the fluff filter",
Page 26
¡ Dry the filters in the filter system of
the base unit thoroughly after
cleaning.
→ "Filter system on the base unit",
Page 28
3.3 Energy saving mode
If you do not use the appliance for a
brief period, it automatically switches
to energy-saving mode. All displays
go out and ⁠ flashes.
Energy-saving mode ends when you
use the appliance again.

Installation and connection

4 Installation and con-
nection
Installation and connection
4.1 Unpacking the appliance
ATTENTION!
Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.
Remove these objects, along with
▶
all supplied accessories, from the
drum before starting the appliance.
Remove any packaging and pro-
1.
tective covers completely from the
appliance.
→ "Disposing of packaging",
Page 11
Check the appliance for visible
2.
damage.
Open the door. → Page 25
3.
Remove any accessories from the
4.
drum.
12
Close the door.
5.
4.2 Contents of package
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
ATTENTION!
If the appliance is operated with in-
complete or defective accessories,
the appliance may not be able to op-
erate properly, or this may result in
material damage or damage to the
appliance.
Do not operate the appliance with
▶
incomplete or defective accessor-
ies.
Replace the accessories in ques-
▶
tion before operating the appli-
ance.
→ "Accessories", Page 24
The delivery consists of the following:
¡ Tumble dryer
¡ Accompanying documents
4.3 Requirements for the in-
stallation location
ATTENTION!
If the appliance is tilted at an angle
greater than 40°, residual water may
leak out of the appliance and cause
material damage.
Tilt the appliance carefully.
▶
Transport the appliance in an up-
▶
right position.
If residual water in the appliance
freezes, this may cause damage to
the appliance.
Do not install or operate this appli-
▶
ance anywhere that is liable to ex-
perience frost or outdoors.