Ground Zero DSP Series Quick Start Manual
10-channel digital sound processor
Hide thumbs
Also See for DSP Series:
- Manual (22 pages) ,
- Owner's manual (12 pages) ,
- Software manual and firmware update instruction (3 pages)
Subscribe to Our Youtube Channel
Related Manuals for Ground Zero DSP Series
Summary of Contents for Ground Zero DSP Series
- Page 1 GROUND ZERO GZDSP 6-10SQ DSP SERIES 10-Channel Digital Sound Processor GZDSP 6-10SQ Quickstart Guide DSP SERIES AWV4.1...
-
Page 2: General Information
GROUND ZERO GZDSP 6-10SQ General information The information and advice contained in this guide may be deviate from the delivery condition of the device. This is due to constant further development of the product. Content • GZDSP 6-10SQ • USB cable, type A to type B (1,5 m) •... -
Page 3: Specifications
BT interface. App control & music streaming To use your mobile device controlling the unit and changing the adjustments, please install the GROUND ZERO GZDSP 6-10SQ control app on your device (Android / iOS) and connect the separately available music streaming interface. - Page 4 GROUND ZERO GZDSP 6-10SQ General installation note • To avoid heat build-up, sufficient air supply for cooling must be provided. Never cover the surface of the heatsink entirely. • The DSP unit should NEVER be mounted onto a vibrating part or surface such as a subwoofer enclosure.
- Page 5 GROUND ZERO GZDSP 6-10SQ Harness connection To connect the power and speaker input harness (check the pinout on the next page). This unit offers automatic turn-on. Using the feature, it´s unnecessary to connect a remote wire. Set the switch to the RCA position for line input using the Remote cable or SPK position for the high-level input TURN-ON switch turn-on sensing.
-
Page 6: Pc Software Installation
GROUND ZERO GZDSP 6-10SQ PC software installation The software can be downloaded from the support area at our Ground Zero web page: www.ground-zero-audio.com * compatible operating systems: Microsoft Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 / 11 ®... -
Page 7: Failure Diagnosis
GROUND ZERO GZDSP 6-10SQ Failure Diagnosis Failure Control Help / Solution -check the fusing -check the remote wire No function PWR LED on? -check the +12 Volt connection and wire -check the ground connection and wire signal wire no contact or broken... -
Page 8: Technical Specifications
6 – 48 dB/oct. slope with selectable filter characteristic Phase correction 0° / 180° Optionally available accessory Wired remote control GZREM 6-10 GROUND ZERO products are engineered in Germany GROUND ZERO - international sponsor of Ground Zero GmbH Erlenweg 25, 85658 Egmating, Germany Tel. +49 (0)8095/873 830 www.ground-zero-audio.com...
Need help?
Do you have a question about the DSP Series and is the answer not in the manual?
Questions and answers