Wireless Settings - D-Link DAP-1160 User Manual

Section  - Configuration
Select Access Point mode,AP Client mode,Bridge mode,Bridge with AP mode or Repeater mode.
Mode:
Wireless Network
dlink is the default setting.
Name
(Also called same SSID name in order to communicate on the network. If you choose to change the SSID from the default setting, input
:
the SSID) your new SSID name in this field.
Site Survey:
Click this button to choose the root AP from an available connection list. This button is available in AP client and Repeater
mode.
Wireless
Auto channel selection is the select by default.
Channel:
on the network must be set to the same channel to communicate on the network.
Enable Auto
Select Enable or Disable. Enable this feature to auto-select the channel for best wireless performance.
Channel Scan:
Enable Hidden Select Enable if you do not want the SSID to be broadcast by the DAP-1160. This prevents the SSID from being seen
Wireless: by Site Survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1160 in order to
connect to
Wireless
Select a wireless security setting. Options are None, WEP, WPA, WPA2 or WPA2-Auto.See p.34 for a detailed explanation
Security Mode:
of the wireless security options.
D-Link DAP-1160 User Manual
The SSID is a unique name that identifies a network. All devices on a network must share the
it.

Wireless Settings

Input a new number if you want to change the default setting. All devices
1