SAFETY INSTRUCTIONS This product has been designed with the utmost safety in mind. why users should observe the following instructions when using this device. This device uses a semiconductor unit and contains no user serviceable parts. Do not disassemble this device, otherwise you are exposed to the risk of electric shock.
Connecting other devices Before connecting other devices to this unit, please make sure to disconnect power. Otherwise damage to the unit or personal injury might occur. Faults to be repaired If any of the following problems occurs, please disconnect power to A.
Safety check After completing maintenance, ask your service technician to perform an on-site safety check to ensure that the unit is operating safely. Remark: Before using this product, read these instructions carefully and keep it well for future use. EN – 4...
Page 5
SUPPLY CONTENT 1x BT speaker SSS 3400K 2x Wireless microphone 2x Microphone holder 1x AUX-IN cable (3.5mm) 1x USB-C charging cable DESCRIPTION OF THE BT SPEAKER AND MICROPHONE EN – 5...
Page 7
SSS 3400K front side Wireless microphone 1 Wireless microphone 2 Removable holder for wireless microphone 1 Removable holder for wireless microphone 2 BT speaker carrying handle Treble speaker Wideband speaker SSS 3400K top side Previous track button, microphone volume down...
Page 8
LED indicator SSS 3400K back side 12 COAX input 13 Input for audio AUX IN mini jack (3.5mm) 14 Memory card slot 15 USB-A for playback from memory device 16 Charging socket (USB-C) 17 LED charging indicator Wireless microphone 18 Sound sensor...
PAIRING DEVICES VIA BLUETOOTH Turn on the BT speaker and search for its Bluetooth name “SSS 3400K” in the device to be paired, then start the pairing EN – 9...
Page 10
process. If you are requested to enter a pairing code while your device and the BT speaker are pairing, use the code: “0000”. To disconnect the paired device, end the pairing session on your mobile device or long hold the “Change source” button. Disconnection will be indicated by an acoustic tone.
COAX INPUT Connect the digital input to the output of your device. Switch the input mode to COAX by pressing and holding the “Play / Pause / Change Source” button. Set the correct codec on the output device. A poorly chosen codec on the output device will manifest itself in the BT speaker as a rattle.
VOLUME CONTROL The BT speaker volume (+/-) is controlled using the rotary control on the BT speaker. Turn the rotary control to the left to reduce the volume. Turn the rotary control to the right to increase the volume. The volume setting does not apply to microphone volume settings. Wireless microphones.
playback mode. The music playback from the connected storage will start automatically. Upload your music to the storage in the order in which it will be played by the BT speaker. Supported playback Memory card playback Insert the memory card with the contacts facing the USB-A port. When you insert a memory card, the BT speaker will automatically memory card, the BT speaker will switch to the last active source the card will release.
charging cable. The charging process will be indicated by a red LED. Microphone control: Turning the microphone on button on the microphone. Change the To lower the volume, hold down the previous volume of the track button on the BT speaker. microphones.
Page 15
BT speaker Warning: Avoid feedback by keeping the microphone far enough away from the SSS 3400K speakers. If you get too close, feedback will occur and may result in damage to the speakers or the hearing of a person near the system.
We recommend to store the unit with a the battery charged to prevent irreparable damage to the battery (loss of capacity). TECHNICAL SPECIFICATIONS SSS 3400K Wireless karaoke speaker Features: Two wireless microphones in the package Maximum speaker output 30W...
Page 17
Inputs: Bluetooth Audio 5.0 AUX audio input (3.5mm stereo connector) Playback from USB (up to 32GB / MP3) Card Slot (up to 32GB / MP3) Coaxial input Other: Rechargeable speaker battery: 4,000mAh Li-Ion USB-C power Accessories: USB charging cable, 3.5mm external cable (AUX), Dimensions: 280×273×168mm Weight: 2,000g Bluetooth...
Page 18
To dispose of this product, please ask your local authorities or dealer for the necessary information on correct disposal. This product complies with EU requirements. to the 2014/53/EU directive. The full text of the EU Declaration of Conformity is available at: www.sencor.eu. EN – 18...
Page 19
prior notice and we reserve the right to make such changes. EN – 19...
Page 20
Manufacturer: FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic Visit www.sencor.com for detailed information about authorized service centers. The original version of the instructions is in the Czech language, other language versions are made by the appropriate translation.
Need help?
Do you have a question about the SSS 3400K and is the answer not in the manual?
Questions and answers