Advertisement

E2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E2 and is the answer not in the manual?

Questions and answers

CJ
March 21, 2025

HOW DO I UNLOCK THE SPEED LIMITER?

2 comments:
Samuel Krieger
May 1, 2025

@CJ the code is 1313

Mr. Anderson
May 14, 2025

To unlock the speed limiter on the WINDONE E2, press the power button and set the assist level to mode 7 on the left side of the handlebar, and set the speed mode to 7s on the right side. If the speed still does not reach 28 mph after these settings, contact WINDONE support to change the controller.

This answer is automatically generated

CJ
March 21, 2025

HOW DO I INCREASE THE TOP SPEED?

1 comments:
Mr. Anderson
March 21, 2025

To increase the top speed of the WINDONE E2, you can try the following:

1. Increase Pedal Assist Level – Higher pedal assist levels (PAS 3 or 4) provide more motor power, increasing speed.
2. Use a Higher Gear – Shifting to a higher gear allows for faster speeds with less pedaling effort.
3. Modify the Motor Settings – The bike has a 750W hub motor capable of outputting over 1,240W. Adjusting the controller settings may help unlock more power.
4. Upgrade the Tires – Better tires can improve traction and efficiency, allowing for smoother and faster riding.
5. Ride on a Flat Surface – The bike reaches higher speeds on level ground compared to inclines.
6. Reduce Resistance – Keeping the bike well-maintained (proper tire pressure, lubricated chain, and aligned wheels) improves overall performance.

Be aware of local speed limits and safety concerns when modifying or increasing the bike’s speed.

This answer is automatically generated

jim bergin
February 5, 2025

1 bought two e 2 windone bikes at x-mas both bikes top speed ic only 19.8 mph

1 comments:
Mr. Anderson
May 14, 2025

The top speed of the WINDONE E2 bike is 20 mph using throttle only and 28 mph with pedal assist.

This answer is automatically generated

Shay
May 10, 2025

How do I get into the setting of my bike it's an e2 I believe

Summary of Contents for WINDONE E2

  • Page 2: Table Of Contents

    Daily Care And Maintenance • After riding on a rainy day, please clean up the rainwater and sediment immediately 12. Specifications lf you have any trouble with the installation, please contact WINDONE customer service for 13. Limited Warranty Statement support windone.com 14.
  • Page 3: Package Contents

    Phillips screwdriver x 1 Front Shock Absorber Pedal Crank Set Please check package contents carefully, if anything is missing or damaged, please contact WINDONE customer service for Seat cushion shock Front wheel shaft x 1 absorber x 1 support:support windone.com...
  • Page 4: Assembly And Set Up

    3. Assembly and Set up Installing The Front Wheel Display Battery Lock gasket Seat Cushion Shock Absorber screw nut Disc Brake Disc Brake Motor 1. Take out the screws and front fender. Install the front fender first, and then install the front wheel. Battery Sensor Kickstand...
  • Page 5 Installing The Handlebars Installing The Headlight screws hex wrench 1. Utilize a 5mm hex wrench to initially tighten the screw at position ①. 1. Insert the headlight screw into the headlight hole as shown in the picture. 2. Use the installation tool to tighten the screws. 2.
  • Page 6 Install Seat Shock Absorbers Installing The Pedals 1. Please Loosen the screws connecting the cushion to the shock absorber. 2. Pull the seat cushion upward to unfold the seat cushion. 3. Align the screw holes and use the installation hex wrench to tighten the screws. 4.
  • Page 7 Display Introduction How to Use Headlight & Horn 1. There are five buttons on the operating unit, the power button , the plus button , the minus button the headlight button and the switch 2. After long pressing the key, the instrument starts to work and the working power of the controller is turned on. In the power-on state, short press the key to turn off the power of the electric bicycle.
  • Page 8: Start-Up Procedure

    4. Start-up Procedure 5. Battery Key Positions After assembling the bike according to the video, securing all components, having a certified mechanic check the assembly, and reading 1. Any time the battery is in key position A (power on, battery locked to the frame), the battery cannot be removed. this manual, follow these steps to turn on the bike and select a pedal assist level: 2.
  • Page 9: Remove The Battery

    6. Remove the Battery 7. How to Charge The Battery Your electric bike will be fully charged when the LED light on the charger changes from red (charging) to green (fully charged). After reaching full charge, it will automatically stop charging. Even so, we still don't recommend charging your electric bike for an extended period.
  • Page 10: Notes Of Charging

    8.Notes of Charging 9. Improtant Safety Instructions WARNING - When using this product, basic precautions should always be followed,including the following: 1. Charging time: 80% full charge in 4 hours, full charge in 6-7 hours. 1.Read all the instructions before using the product. 2.
  • Page 11: Moving And Storage

    11. Daily Care And Maintenance 6.La batterie doit être chargée lorsque la température ambiante est comprise entre 10°C (50°F) et 40°C (104°F].Ne chargez jamais la batterie lorsque les températures ambiantes sont en dehors de cette plage.La batterie n'est pas destinée à être utilisée à une température ambiante inférieure à -10°C (14°F) ou supérieure àune température Cleaning ambiante de 45°C (113°F).
  • Page 12: Specifications

    Battery Pack 13Ah Rated Capacity 6. If you return a product to WINDONE, [a] without an RMA from WINDONE [b] without all parts included in the original package, WINDONE retains the right to refuse delivery of Unusualtemperature/short circuit/under voltage such return.
  • Page 13: Question & Answer

    1. Is there any necessary information that needs to be included before contacting the WINDONE Support Team? If a hardware defect is found and a valid claim is received by WINDONE within the warranty period, WINDONE will, at its option and to the extent permitted by law, either [1] A:Yes, if you need any support from WINDONE, please contact us at support@windone.com, and please always include your order number, correct model No.
  • Page 14: Trouble Shooting

    A: Please ensure that you have pressed the power button to set the assist lever to mode 7 on the left side of the handlebar and the speed mode to 7s on the right side. After setting the speed mode to 5 and the power mode to 7s, if the speed still can't reach 28 mph, please contact the WINDONE support...
  • Page 15: Contact Us

    16.CONTACT US Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your WINDONE electric bike E2.E-mail Service: support@ windone.com @windonebike @windoneofficial @Windone @windonebike...

Table of Contents

Save PDF