Beko 28C723IDW Operating Instructions Manual page 29

Via aerial socket
Make sure the TV and video recorder are both switched off.
Unplug the aerial lead from the TV and plug it into the aerial socket on the video recorder
(if fitted). Plug a coaxial plug into the RF out socket on the rear of the video recorder and
plug the other end into the aerial socket of the TV . Switch on the video recorder and the
TV . If your video recorder has a test signal, switch it on. (Refer to the video recorder user
guide). See 'Tuning the TV' and carry out the tuning procedure for the video recorder test
signal. Select a programme number 0 or between 55 and 99.
S-Video Player
If you have an S-Video player you can connect it to SCART socket 2 via an adaptor from
scart to S-Video/PHONO audio (not supplied). Press the
A V2S (available for two scart models).
Via PHONO lead and S-Video socket
28
You can also connect it through the S-Video socket of the TV (Model dependant).
Plug the S-Video plug into the S-Video socket and the audio leads into the audio sockets.
AV
Press the
»
scart models.
R
L
MONO
VIDEO
R
L
MONO
VIDEO
S-Video In
button repetitively to select AV3S for two scart models or AV4S for three
«
ANTENNA IN
R
L
TV DIGITAL AUDIO AUDIO OUT
OUT
OUT
ANTENNA IN
R
L
OUT TV DIGITAL AUDIO AUDIO OUT
OUT
AV
»
COAX
R
AUDIO OUT
L
AV3
AV1
AV2
VIDEO OUT
EURO A V 1 TV
S-VIDEO OUT
EURO A V 2 DECODER
VIDEO
VIDEO OUT
EURO A V 1 TV
S-VIDEO OUT
EURO A V 2 DECODER
VIDEO
button three times to select
«
~
110-240 V
50/60 Hz 35 W
~
110-240 V
50/60 Hz 35 W