Page 1
ICE MAKER INSTRUCTION MANUAL Model: IM2102ADT-UL Read this manual thoroughly before using and save it for future reference Guangdong Xinbao Electrical Appliances Holdings Co., LTD ADDRESS: ZHENGHE ROAD SOUTH , LELIU TOWN, SHUNDE DISTRICT,FOSHAN CITY, GUANGDONG PROVINCE, CHINA 第 0 页 共 11 页...
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, explosion, electric shock, or injury when using your ice maker, follow these important safety instructions: 1. Before using check that the voltage power corresponds to the one shown on the appliance nameplate. 2.
Page 3
16. Do not plug or unplug product with wet hands. 17. Unplug the product before cleaning,maintaining and when not in use. 18. Do not use with water that is microbiologically unsafe or of unknown quality. 19. Do not clean your ice maker with any flammable fluids. The fumes may create a fire hazard or explosion.
Key (with indicator) Function ON/OFF Start or stop the appliance Standby mode: “ICE” indicator blinks; Working condition: “ICE” indicator lights solidly. ICE FULL “ICE FULL” indicator lights up when the ice basket is full. ADD WATER “ADD WATER” indicator lights up when the water reservoir is lack of water.
4) Grasp the center of handle and lift it upwards (see Fig.3), check and make sure that there shall be no abnormal condition can be found. Fig.1 Fig.2 Fig.3 3. Please ensure the ice maker is level and on a stable table or platform to avoid malfunction.
Page 7
NOTE: Please make the ice maker be rested for 30 minutes before plug if it has been moved. 3. Open the top lid and remove the ice basket. 4. Fill the water reservoir with drinking water. NOTE: Do not fill above the MAX water level mark. 5.
maker is not used for a long time. CLEANING AND MAINTENANCE To keep your ice tasting fresh and your ice maker looking great, we recommend cleaning your ice maker once per week. 1. Stop the ice-making cycle by pressing the “ON/OFF” key, unplug the ice maker from the wall outlet and allow it to warm up to room temperature.
(Fig.4) (Fig.5) (Fig.6) TROUBLESHOOTING Problem Possible causes Solution “ADD WATER” 1.Low water level or lack of 1.Stop making ice, refill indicator turns on water water and then press 2.The water screen at the bottom “ON/OFF” key to restart of water reservoir is blocked. ice-making cycle.
Page 10
3.Send it to the authorized department for repair. “ICE FULL” indicator 1.Ice basket is full and the 1. Remove the ice from ice lights up infrared light is blocked by the basket. ice. 2a. Wipe up the foreign 2. Infrared light-emitting diode objects on the infrared &...
8℃ and 28℃. 3. Operate the ice maker at a environment with an ambient temperature between 10℃ and 32℃. TECHNICAL PARAMETERS Model: IM2102ADT-UL Applicable climate: ST/SN/N/T Class: Power source: 120V/60Hz Rated power: 105W Refrigerant/Refrigerant amount:...
Need help?
Do you have a question about the IM2102ADT-UL and is the answer not in the manual?
Questions and answers