Creating A Preset - D-Link MediaLounge DSM-320RD Owner's Manual

Music (continued)

Creating a Preset

To create a preset, follow the steps below:
1. Select the MUSIC category from the Home page or click on the MUSIC
button on the remote control.
2. Select a viewing category. Use the down arrow and up arrow on the remote
control to navigate to a viewing category (by All Tracks, Playlists, Genres,
Artists, Albums, or Folders). Select the option by clicking ENTER or the
right arrow on the remote control.
3. Select a Track. Use the up arrow and down arrow buttons to navigate one
track at a time. The PAGE up and PAGE down buttons can be used to
navigate through the track list one page at a time. Highlight the track to
define as a preset.
4. Press the number of the preset you want to assign to this track. Select a
number between 1-9 on your remote control. If you select the number 1,
hold the number 1 key down until the preset number icon
to your selection after about five seconds. The number of the preset you
selected will remain next to the track. If you selected a number that has
already been assigned to another song, the previous selection will no longer
be defined as a preset. Note: Presets cannot be erased but can be replaced
by another selection.
After creating a preset, you can play the preset any time the DSM-320RD and
the PC containing the tracks are powered on by pressing the preset number
on your remote control. The song files on your PC must remain in the same
folder location that they were in when the preset was created.
You can play your favorite preset during a slideshow presentation by pressing
the number of the preset during the slideshow playback.
52
appears next