Download Print this page

Advertisement

Quick Links

Installation Manual
WRIGHT GCS, ZXT-ZXL
For the following kits:
95320001 - GCS-3B-ZXT/ZXL/ZK/LG
95320002 - Pulley Kit, 52" ZXT/ZXL
95320003 - Pulley Kit, 61" ZXT/ZXL
95320004 - Pulley Kit, 72" ZXT/ZXL
Revised May 2024
PN 79510034
FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY OR DEATH.
Read this manual and other manuals that came with your mower before operating.
©1998-2024 Wright Manufacturing, Inc. All rights reserved. This material may not be reproduced or copied, in whole or part, without written permission
from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2, Stander, and Sentar are trademarks of Wright Manufacturing.

Advertisement

loading
Need help?

Need help?

Do you have a question about the GCS and is the answer not in the manual?

Questions and answers

Summary of Contents for WRIGHT GCS

  • Page 1 Read this manual and other manuals that came with your mower before operating. ©1998-2024 Wright Manufacturing, Inc. All rights reserved. This material may not be reproduced or copied, in whole or part, without written permission from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2, Stander, and Sentar are trademarks of Wright Manufacturing.
  • Page 2 2- Install ZXT dimensions with complete GCS and 2. Remove clevis pins and raise the bagger weights installed lid/frame assembly out of the crate. Set it on the plastic sheet with the handle side down 52” Deck 61” Deck 72” Deck...
  • Page 3 11. Install the GCS deck adaptor from pulley kit onto the discharge side of the deck. 6. Install the bags onto the frame. 12. Cut the three (3) heavy duty zip ties to remove the blower assembly from the crate.
  • Page 4 16. Secure blower to the deck by inserting the hitch pin into the tube on the GCS deck The tube provided is 60 in long. Depending adaptor. on the deck size and wheel setup, shortening the tube may be necessary to prevent rubbing against other components and reduce clogging during operation.
  • Page 5 Parking Brake Adjust assembly on the front of the caster frame. Parking brake on your mower may need to be adjusted when using the Wright Grass Collec- tion System. There are two adjustments which can be made on the parking brake for the ZXT.
  • Page 6 Properly • Check blower condition performed this procedure should not require • Check for idler and belt wear excessive force. Always check with your Dealer or the Wright web- site, parts.wrightmfg.com for the Part Lists and diagrams for your unit.
  • Page 8 4600 Wedgewood Blvd Ste X Frederick MD 21703-7167 www.wrightmfg.com...

This manual is also suitable for:

ZxtZxl