HP Jet Fusion 5200 Series User Manual page 148

Maintain the cartridges
During the normal lifetime of a cartridge, no specific maintenance is required.
However, to maintain the highest quality, replace a cartridge when it reaches its expiration date. An alert
notifies you when any cartridge reaches its expiration date.
Before you use a cartridge for the first time, the material should acclimatize to the environmental
conditions of the room for at least 2 days.
Store the cartridges
Cartridges should be stored according to cartridge specifications.
Before use, a cartridge should be kept at processing-station environmental conditions for at least 2
days.
CAUTION:
material after removing the seal, and storing an opened cartridge containing material can render the
material unusable and cause safety hazards, such as a cloud of material if dropped. Depending on the
material, it can be sensitive to temperature, humidity, or other factors. Using cartridges under
uncontrolled conditions can affect the functionality of the equipment or severely damage it.
Bulk material supply replacement
Material in bulk is supplied in an Octabin container. This supply needs to be emptied into new material
loading tank containers to be able to use it in the processing station.
See Fill the material loading tanks from the bulk material supply on page
IMPORTANT:
time.
Ensure that any new material loading tank contains the same material type that is in use in the
processing station.
1. At the processing station's front panel, tap the Maintenance icon
2. Disconnect the material loading tank connector from the lid, and hang it from the parking place on
the top structure.
HP recommends storing only sealed cartridges. Cartridges are not designed for storing
Do not use material loading tanks with other material cartridges connected at the same
143.
, then Material > Replace.
Maintain the cartridges 141