Table of Contents
Advertisement
Quick Links
Post Hole Digger Drill
User Manual
[Revision 2.0 October 2018]
READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND
MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in
appearance, assembly, inclusions, specifications, description and packaging.
The product is NOT supplied with engine oil, although traces of oil from the manufacturing process
may be present. It is essential to add adequate engine oil of the correct type to the engine before use
– see
Engine
Oil.
Failure to add engine oil will void the product
warranty.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baumr-AG PHD-75CC
Summary of Contents for Baumr-AG PHD-75CC
- Page 1 Post Hole Digger Drill User Manual [Revision 2.0 October 2018] READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
-
Page 2: Table Of Contents
Post Hole Digger Drill Table of Contents INTRODUCTION ............................ 1 COMPONENTS ............................ 2 SAFETY PRECAUTIONS ........................3 PROTECTIVE CLOTHING GUIDE ......................6 ASSEMBLING THE POST HOLE DIGGER DRILL ................8 FUELLING THE POST HOLE DIGGER DRILL ..................9 Fuel Mixture .......................... 9 STARTING THE POST HOLE DIGGER DRILL ...................11 Starting the Engine ...................... -
Page 3: Introduction
Post Hole Digger Drill Introduction To correctly use the Post Hole Digger Drill and prevent accidents, do not start your work without having first carefully read this manual. You will find explanations concerning the operation of the various parts plus instructions for necessary checks and relative maintenance. NOTE: illustrations and specifications in this manual may vary according to country requirements and are subject to change without notice by the manufacturer. -
Page 4: Components
Post Hole Digger Drill Components Starter handle Half-throttle button Choke lever Reduction gearbox grease cap On/Off switch Spark plug Bit stop pin Reduction gearbox Fuel tap Share Throttle trigger Muffler guard Fuel tank cap Air filter cover... -
Page 5: Safety Precautions
Post Hole Digger Drill Safety Precautions WARNING! If used correctly, the Post Hole Digger Drill is a powerful, fast, high performance tool; if used improperly or without the due precautions, it could become a dangerous tool. For a safe and pleasant work, always comply strictly with the safety rules that follow, as well as those found throughout this manual. - Page 6 Post Hole Digger Drill • Do not operate the Post Hole Digger Drill when you are tired, fatigued or under the effect of alcohol and/or drugs (Figure 1). • Never wear scarves, bracelets or anything else which could get caught by the machine or bit. Wear close-fitting safety clothing (see Protective Clothing Guide).
- Page 7 Post Hole Digger Drill • If the bit jams up, release the throttle trigger and stop the engine immediately. • If your Post Hole Digger Drill is no longer usable, dispose of it properly without damaging the environment by handing it in to your local dealer who will arrange for its correct and proper disposal.
-
Page 8: Protective Clothing Guide
Post Hole Digger Drill Protective Clothing Guide Size M p.n. 001000844 Size L p.n. 001000845 Size X p.n. 001000846 Size XX p.n. 001000847 Size M p.n. 001000931 Size L p.n. 001000932 Size X p.n. 001000933 Size XX p.n. 001000934 p.n. 0010008.13 p.n. - Page 9 Post Hole Digger Drill Size 41 p.n. 001000975 Size 42 p.n. 001000976 Size 43 p.n. 001000977 Size 44 p.n. 001000978 Size 45 p.n. 001000979 Size 41 p.n. 001001079 Size 42 p.n. 001001080 Size 43 p.n.001001081 Size 44 p.n. 001001082 Size 45 p.n.
-
Page 10: Assembling The Post Hole Digger Drill
Post Hole Digger Drill Assembling the Post Hole Digger Drill LUBRICANT FOR REDUCTION GEARBOX (Figure 1). WARNING! The Post Hole Digger Drill is supplied with TAMOIL TAMLITH GREASE 2 (150 g) grease in the reduction gearbox. Remove the screw (A) under the reduction gearbox and check for the presence of grease. FITTING BITS (Figures 2 –... -
Page 11: Fuelling The Post Hole Digger Drill
Post Hole Digger Drill Fuelling the Post Hole Digger Drill Fuel Mixture • Use a 4% (25:1) petrol/oil mixture. Refer to Figures 9 – 10. • With Oleo-Mac PROSINT oil, use a 2% (50:1) mixture. WARNING! The 2-stroke engines have high power ratings; we therefore recommend the use of leaded or unleaded petrol of a known brand, with an octane rating no lower than 90. - Page 12 Post Hole Digger Drill • Stir the mixture well before refuelling (Figure 13). • Always refuel (Figures 14 – 15) with the engine turned off and away from flammable environments. • Before unscrewing the fuel tank cap, position the Post Hole Digger Drill on a solid, flat surface so that it cannot fall over.
-
Page 13: Starting The Post Hole Digger Drill
Post Hole Digger Drill Starting the Post Hole Digger Drill Starting the Engine Open the fuel tap (A, Figure 17). Put the switch (B, Figure 18) in the “I” position. Pull the throttle lever (D) and lock it in the half-throttle position by pressing the button (E), then release the lever (D), put the choke lever (F, Figure 19) in the “CLOSE”... -
Page 14: Stopping The Engine
Post Hole Digger Drill Stopping the Engine Bring the throttle to the idle position (D, Figure 25) and wait until the engine cools down. Switch the engine off by putting the on/off switch (B) in the “STOP” position. Carburettor Before adjusting the carburettor, clean the starter cover (Figure 27), the air filter (G, Figure 26) and warm up the engine. -
Page 15: Maintenance And Storage
Post Hole Digger Drill Maintenance and Storage Air Filter Every eight hours, remove the cover (A, Figure 33) and the filter (G). The filter (G) should be washed with petrol and dried before refitting it. Fuel Filter Check the fuel filter periodically. Replace it if it is too dirty (Figure 34). A dirty filter can cause difficult starting and lowers the engine’s performance. -
Page 16: Starting Unit
Post Hole Digger Drill Starting Unit Use a brush or compressed air to keep the cooling louvers of the starter assembly free and clean (Figure 35). Engine Clean the cylinder fins (Figure 36) with compressed air or a brush periodically. Dangerous overheating of engine may occur due to impurities on the cylinder. -
Page 17: Technical Specifications
Post Hole Digger Drill Technical Specifications Petrol EURO 2 - Two Stroke Commercial Engine Type 75cc Displacement 10,000 RPM Maximum Engine Speed 40:1 Reduction Ratio 1.2 Litre Fuel Tank Capacity Regular Unleaded 95 +RON Fuel Type 25:1 to 40:1 (25 parts fuel to 1 part 2 stroke oil) Fuel Mix 100, 200, 300mm (Diameter);... - Page 18 ©2018 Baumr-AG. All rights reserved. No part of this document, including descriptive content, concepts, ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, scanning or recording, or any information storage and retrieval system, without express permission or consent from the publisher.
Need help?
Do you have a question about the PHD-75CC and is the answer not in the manual?
Questions and answers