D-Link DUB-H4 Quick Installation Manual page 2

Installing the DUB-H4
A. Plug the USB type B connector
(the larger end of the cable) into
the back of the DUB-H4.
B. Plug the AC adapter into the DUB-
H4 and into a power socket in a
power-strip or a wall jack.
C. Plug the USB type A connector
(the narrow end of the cable) into
an available USB 2.0 port on
your computer (or USB 1.1 if you
don't have USB 2.0).
D. Your computer will automatically detect and install the DUB-H4. You
may now connect USB 2.0 or USB 1.1 devices to an available USB
port on the front of the DUB-H4.
Type B
Type A