15. Power Source - LEXIBOOK Spider-Man LCD1SP User Manual

10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
An appliance and cart combination should be moved with care.
Quick stops, excessive force and uneven surfaces may cause the
appliance and cart combination to overturn.
PORTABLE CART WARNING
(Symbol provided by RETAC)
SC126A
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture does not operate normally, or has
been dropped.

15. Power source

This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
16. Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where
it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
17. Overloading
Do not overload wall outlets and extension cords as this can result in
a risk of fire or electric shock.
18. Object and liquid entry
Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short out parts that could
result in fire or electric shock. Never spill or spray any type of liquid on
the product.
19. Outdoor antenna grounding
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built up static charges. Section 810 of the National Electric
Code ANSI/NFPA 70 provides information with respect to proper
grounding of the mast and supporting structure, grounding of the
leading wire to an antenna discharge product, size of grounding
conductors, location of antenna-discharge product, connection to
grounding electrodes and requirements for grounding electrodes.
ELECTRIC
SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
20. Service
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
21. Replacement parts
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original parts. Unauthorized
substitutions may result in fire or electric shock or other hazards.
22. Safety check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
23. Wall or ceiling mounting
The product should be mounted to a wall or ceiling only as recom-
mended by the manufacturer.
24. Damage requiring service
Unplug the product from the wall outlet and refer servicing to qualified
service personnel under the following conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by the following operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore in the product to its normal operation.
e) If the product has been dropped or the cabinet has been damaged.
f) When the product exhibits a distinct change in performance-this
indicates a need for service.
25. Note to CATV system installer
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Warning
1) To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
2) The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
3) The disconnected device (appliance inlet) shall remain readily
operable.
PRECAUTION WITH TV:
When displaying a still image.
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours
as it can cause screen image retention. This image retention is also
known as "screen burn". To avoid such image retention, reduce the
degree of brightness and contrast of the screen when displaying a
still image.

ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PARTH)