(5-30°C) and 10-90% relative humidity (RH). Keep out PRINCIPLE AND INTENDED USE of direct sunlight. The Teladoc Health blood glucose test strips are used • Use the test strips at room temperature. This provides with the Teladoc Health connected blood glucose meter precise results.
PRECAUTIONS INSTRUCTIONS FOR USE • For in vitro diagnostic use. The test strips are to be used See your Owner’s Manual for complete instructions for blood only outside the body for testing purposes. sample collection before use. • Your blood glucose meter is for single patient use. Do not 1.
Owner’s Manual. Two ranges CTRL 1 and CTRL 2 are measurement of glucose in whole blood within shown on the test strip vial label. Teladoc Health control the range of 20-600 mg/dL. solution 1 is sufficient for most all self-testing needs. If you •...
Page 5
MEAN Blood glucose, mg/dL Linear Regression Results: Teladoc Health (y) vs. YSI Reference (x) Lay User 47.33 1.77 3.73 Sample Site...
Page 6
REFERENCES 1. Standards of Medical Care in Diabetes - 2024, Diabetes Care -v47: S1 January 2024 2. “FDA Public Health Notification: Use of More than One Person Poses Risk for Transmitting Bloodborne Pathogens: Initial Communication” (2010) https:// content.livongo.com/cp/Bloodborne_Pathogen_Risk.pdf 3. “CDC Clinical Reminder: Use of Fingerstick Devices on More than One Person Poses Risk for Transmitting Bloodborne Pathogens”...
Page 7
(active ingredient). Both have preservatives in an aqueous-based mixture. PRINCIPLE AND INTENDED USE Teladoc Health control solution contains a known STORAGE AND HANDLING concentration of glucose. It is used to confirm that your meter and test strips are properly working together. It also •...
Make sure the control solution test results are in the • Use only Teladoc Health brand control solution with your control range. The ranges for both CTRL 1 and CTRL 2 are Teladoc Health blood glucose meter and test strips.
OFG00405 / OFG000018 LANCING PRINCIPLE AND INTENDED USE The lancing device is used with compatible disposable DEVICE sterile lancets to draw capillary blood from the fingertip for blood glucose testing. The lancing device is intended to be used by a single patient and should not be shared. INSTRUCTION FOR USE Lancing Before testing, choose a clean, dry work surface.
Page 10
4A-4B. Adjust the puncture depth by rotating the lancing device cover. There are a total of 11 puncture depth settings. To reduce discomfort, use the lowest setting that still produces an adequate drop of blood. ADJUSTMENT: 0 – 1.5 for delicate skin • 2 – 3.5 for normal skin • 4 – 5 for callused or thick skin Note: Greater pressure of the lancing device against the finger will also increase the puncture depth.
Page 11
8. Unscrew the lancing device cover. Place the safety tab of the lancet on a hard surface and carefully insert the lancet needle into the safety tab. 9. Press the release button to make sure that the lancet is in the extended position. Slide the ejection button forward to discard the used lancet.
5 years after purchase, we will replace it with a new or equivalent lancing device free of charge. Please contact Member Support at 800.945.4355 for more information. Manufactured for Teladoc Health by: Distributed by: ACON Laboratories, Inc. 5850 Oberlin Drive, # 340...
Need help?
Do you have a question about the OFG00406 and is the answer not in the manual?
Questions and answers