Subscribe to Our Youtube Channel
Related Manuals for Toto S7 Round
Summary of Contents for Toto S7 Round
- Page 1 You are advised to record the following information to allow quick service. Date of purchase : Name of shop : Date : year month day Tel : ( This code is for manufacturer management use. 2024.2.16 D07G50...
- Page 2 Instruction Manual WASHLET SW4736AT40, SW4736 SW4726AT40, SW4726 SW4734AT40, SW4734 SW4724AT40, SW4724 SW4735 SW4725 Thank you for your recent purchase of this product. Please read the enclosed information to ensure the safe use of your product. Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference.
-
Page 3: Table Of Contents
Table of Contents Auto open / close ON / OFF .......25 Introduction Setting confirmation ........25 Auto flushing ON /OFF .......25 Safety Precautions ........4 Temperature Adjustment ......26 Operational Precautions ......9 Warm water / Toilet seet / Drying ....26 Parts Names ..........12 Changing Settings ........28 Preparation ..........18 Setting List ............28... - Page 4 Maintenance Reference Maintenance ..........47 What to Do? ..........54 If the water does not flow due to a water Before maintenance ........47 service interruption ........54 Power Plug ............47 If you cannot operate with Main Unit ............48 Manual spray ..........48 the remote control .........54 Replacing the batteries ......54 Gap between the Main Unit and Bowl Unit ..49 Freeze Damage Prevention ......55...
-
Page 5: Introduction
Introduction Safety Precautions IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING Symbols and Meanings WARNING May result in death or serious injury. CAUTION May result in injury or property damage. WARNING Never disassemble, repair or alter. Refrain from sitting on the seat for long periods. Doing so may cause fire, electrical shock, overheat- It may cause low-temperature burns. - Page 6 Introduction WARNING Do not stick a finger or anything else into the warm Do not touch the connection of power cord with wet air outlet. hands. Do not place anything on the warm air outlet or Doing so may cause electrical shock. drape clothes over it.
- Page 7 Introduction Safety Precautions WARNING CAUTION Do not use a loose or faulty electrical outlet. Do not use the product if the main unit is unstable. Doing so may cause fire or short circuit. Doing so may cause the main unit to come loose and fall, resulting in injury.
- Page 8 Introduction CAUTION To prevent a sudden water leak, do not remove the If the bowl is clogged, turn the power OFF drain plug with water supply filter when the shutoff remove the clog. valve is open. If the auto flush were allowed to function, it would Doing so will cause water to spurt out.
- Page 9 Introduction Safety Precautions DANGER Do not place in or drop into water or other To reduce the risk of electrocution: liquid. Do not use while bathing. Do not reach for the product when it has fallen Do not place or store the product where it can into water.
-
Page 10: Operational Precautions
Introduction Operational Precautions SW4736AT40, SW4736, SW4734AT40, SW4734, SW4735 About the built-in seat sensor When you sit on the toilet seat, the seat sensor turns About the built-in body sensor ON, enabling you to use various features. The body sensor detects human movement. (The deodorizer starts when the seat sensor makes a detection.) The toilet lid opening or "Auto bowl CLEAN"... - Page 11 Introduction Operational Precautions For prevention of damage Do not use the product with the toilet lid removed. Wipe plastic areas such as the main unit and re- Do not expose to direct sunlight. mote control with a soft cloth tightly wrung out with Doing so may cause changes in color, irregular heated water.
- Page 12 Introduction Body Sensor Compliance Canada, Industry Canada (IC) Notices FEDERAL COMMUNICATIONS COMMISSION This device complies with Industry Canada’s licence- (FCC) INTERFERENCE STATEMENT exempt RSSs. This equipment has been tested and found to comply Operation is subject to the following two conditions: with the limits for a Class B digital device, pursuant to (1) This device may not cause interference;...
-
Page 13: Parts Names
Introduction Parts Names SW4736AT40, SW4736 Toilet lid cushions SW4726AT40, SW4726 Toilet lid Body sensor (Built-in) Model No., etc Wand cover Warm air outlet cover Wand Water supply hose Heated seat Power plug Shutoff valve ( Page 19) Seat sensor (Built-in) Power cord A: Main display... - Page 14 Introduction Toilet seat cushions B: Front side of the main unit D: Right side of the main unit Remote control Soft light receiver Cover Main unit removal button ( Page 49) Drain plug with water supply fi lter ( Page 53) Deodorizing fi lter ( ...
- Page 15 Introduction Parts Names SW4734AT40, SW4734 Toilet lid cushions SW4724AT40, SW4724 Toilet lid Body sensor (Built-in) Wand cover Model No., etc Warm air outlet cover Wand Water supply hose Heated seat Power plug Shutoff valve ( Page 19) Seat sensor (Built-in) Power cord A: Main display...
- Page 16 Introduction Toilet seat cushions D: Right side of the main unit B: Front side of the main unit Remote control Soft light receiver Cover Main unit removal button ( Page 49) Drain plug with water supply fi lter ( Page 53) Deodorizing fi lter ( ...
- Page 17 Introduction Parts Names SW4735 Toilet lid cushions SW4725 Toilet lid Body sensor (Built-in) Wand cover Model No., etc Warm air outlet cover Wand Water supply hose Heated seat Power plug Shutoff valve ( Page 19) Seat sensor (Built-in) Power cord A: Main display SW4725 Power LED...
- Page 18 Introduction Toilet seat cushions B: Front side of the main unit C: Right side of the main unit Remote control Soft light receiver Cover Main unit removal button ( Page 49) Drain plug with water supply fi lter ( Page 53) Deodorizing fi lter ( ...
-
Page 19: Preparation
Introduction Preparation If the remote control is secured to prevent theft Using the Product for Hold the remote control and remove the hanger the First Time hooks. (two locations, left and right) Remote control Insert the battery Hanger Remove the remote control from the hanger. Hook Remote control Flat-head screwdriver... - Page 20 Introduction Turn on the power Open the shutoff valve Insert the power plug. Fully open the shutoff valve. X The wand extends and then retracts. Check the "Power" LED illuminates. Power Shutoff valve If the light is off Switch "Power" to "ON" using the remote control. To operate from the back of remote control Press "Power ON/OFF"...
-
Page 21: Operation
Operation Basic Operations Mechanism of As you stand up Auto Functions Auto power deodorizer Auto flushing "EWATER+" is used automatically to clean the Auto wand CLEAN wand and bowl unit. Auto bowl CLEAN As you approach Auto power deodorizer After about 10 seconds Auto open / close Starts the auto power deodorizer Auto bowl CLEAN... - Page 22 Operation Operation under the default settings is described As you move away in "Mechanism of Auto Functions". When you move away These mechanisms be changed. ( Pages 28–46 "Changing Settings") Auto flushing What is meant by "EWATER+" ? Auto open / close "EWATER+"...
-
Page 23: Soft Light
Operation Basic Operations Mechanism of Auto Functions Soft light CLEAN indicator Lighting up the inside of the bathroom with a soft Lights to show that the "Auto bowl CLEAN", light. "Deodorizer", "Auto wand CLEAN", and "Manual spray" functions are operating. It lights up as you approach the bowl unit and goes off after you move away from the unit and a lights up in a cycle... -
Page 24: Using The Remote Control
Operation Using the Remote Control Operate the controls on the remote control; a beep sounds when the main unit receives the signal. Stop Water pressure adjustment Stops the B or C operation. You can adjust the water pressure to one of five levels. Rear washing [-] Softer, [+] Stronger Washes your rear. -
Page 25: Wand Clean
Operation Basic Operations Using the Remote Control (Continued) Wand CLEAN Opening/closing the toilet seat and lid Cleans the wand with For models with the "Auto open/close" function, "EWATER+" the remote control can also be used for operation. After wand cleaning, water comes out from around the wand. -
Page 26: "Power On/Off" Button
Operation Remote control back side How to remove the remote control ( Page 18) Operate the controls on the remote control; a beep sounds when the main unit receives the signal. This section is an overview of the settings that can be configured with the remote control. See the corresponding pages for the detailed descriptions. -
Page 27: Temperature Adjustment
Operation Temperature Adjustment Warm Water, Press the button selected in step repeatedly until a desired temperature level illuminates. Toilet Seat, Drying X The setting changes each time the button is pressed once Five different temperature levels from high to low and "OFF"... - Page 28 Operation Settings complete Press the button selected in step repeatedly X When seat temperature is set, the SEAT LED until the temperature level is set to "OFF". illuminates. X The setting changes each time the button is pressed once Note: The "Drying" cannot be turned "OFF". If the button is not pressed for about 10 seconds, the "Tem- perature adjustment"...
-
Page 29: Changing Settings
Operation Changing Settings Setting List Available Settings Setting Types Applicable Models Bold: Initial settings ON/OFF Auto energy saver ( Page 32) Auto energy saver+ ( Page 32) ON/OFF All models Timer energy saver ( Page 33) 6H/9H/OFF SW4736AT40 , SW4736 ON/OFF... - Page 30 Operation X Setting buttons ( Pages 32–46) Setting with buttons on the front of the remote control Press the button indicated in step 1 for approxi- mately 10 seconds or longer to enter setting mode. Flash Check A Stop button B Rear washing button Press "Stop"...
-
Page 31: The Energy Saver Features
Operation Changing Settings The energy saver features "Auto energy saver", "Auto energy saver+" or "Timer energy Energy saver is on saver" can be selected. To save energy, the temperature of the toilet seat becomes Lit (Green) low (or "OFF"). Note: Even if the energy saver is activated (with the toilet seat heater set to Low or OFF), the toilet seat will be temporarily heated when you sit on it. - Page 32 Operation Timer energy saver and Timer energy saver Auto energy saver / You want to save energy only for a preset duration Auto energy saver+ of time. (6 hours, 9 hours) Once the time is set, the toilet seat heater turns off You want to save the maximum amount of energy automatically during the set time period every day.
-
Page 33: How To Set
Operation Changing Settings How to Set Auto energy saver+ Auto energy saver Press "Auto energy saver" button. X The setting changes each time the button is pressed once. Press "Auto energy saver" button. When set to "Auto energy saver+" X The setting changes each time the button is pressed once. -
Page 34: Timer Energy Saver
Operation Timer energy saver Auto flushing Set the "Timer energy saver" at the time you Set whether or not to clean the bowl unit want to start it. automatically Example: To save energy from 1 am to 7 am (for 6 hours) Press "Auto flushing"... -
Page 35: Auto Flush Delay
Operation Changing Settings Auto flush delay Auto flush lid closed Change the amount of time before the toilet Set whether or not to close the toilet lid flushes automatically automatically before flushing the bowl unit Press "Stop" button until all Press "Stop"... - Page 36 Operation "Auto flush lid closed" does not work if "Auto flushing" About "Auto flush lid closed"… and "Auto open / close" are set as below: (Except when (If the "Flush" button is located on the top side using the Flush buttons on the remote control) of the remote control for SW4736AT40, SW4736, SW4734AT40, or SW4734) Auto flushing...
-
Page 37: Auto Flush Lid Relation
Operation Changing Settings Auto flush lid relation About "Auto flush lid relation" (If the "Flush" button is located on the top side of the remote control for SW4726AT40, Close the toilet lid before flushing the bowl unit SW4726, SW4724AT40, or SW4724) ON/OFF When the toilet lid is closed by hand, the bowl unit flushes in conjunction with the movement of the toilet... -
Page 38: Auto Open / Close
Operation Auto open / close Auto close delay Set whether or not to open and close the toilet Change the amount of time before the lid/seat lid automatically closes automatically Press "Stop" button until all Check Press "Auto open / close" button. LEDs on the remote control X The setting changes each time the button is are lit or flashing. -
Page 39: Auto Open Delay
Operation Changing Settings Auto open delay Seat/lid Change the time period till automatic opening Automatically open and close the toilet lid/ (After closing by hand or remote control.) Automatically open and close the toilet seat and toilet lid Press "Stop" button until all Check LEDs on the remote control Press "Stop"... -
Page 40: Auto Wand Clean
Operation Auto wand CLEAN Auto bowl CLEAN Set whether or not to clean the wand Set whether or not to spray mist in the bowl automatically unit automatically Press "Stop" button until all Press "Stop" button until all Check Check LEDs on the remote control LEDs on the remote control are lit or flashing. -
Page 41: Deodorizer
Operation Changing Settings Deodorizer Auto power deodorizer Set whether or not to deodorize automatically Set whether or not to power deodorize after sitting on the toilet seat automatically after standing up Press "Stop" button until all Press "Stop" button until all Check Check LEDs on the remote control... -
Page 42: Night Light
Operation Night light About "Night light"… You can change "Soft light" and "Bowl light" to "Night Set whether or not to change "Soft light" and mode", a lighting mode suitable for night. "Bowl light" to "Night mode", a lighting mode Note: The light does not turn on if "Soft light"... -
Page 43: Soft Light
Operation Changing Settings Soft light Bowl light Set whether or not to use the soft light Set whether or not to use the light inside the bowl unit Press and hold both the "Stop" Check button and "Water pressure Press and hold both the "Stop" Check adjustment +"... -
Page 44: Clean Indicator
Operation CLEAN indicator Beep sound Set whether or not to light up the CLEAN Set whether or not to make a beep sound indicator Press and hold both the "Stop" Check button and "Water pressure Press and hold both the "Stop" Check adjustment +"... -
Page 45: Pressure/Position Setting
Operation Changing Settings Pressure / position setting Personal setting Set whether or not to keep your favorite Set whether or not to use the personal setting pressure and position settings Press and hold both the "Stop" Check button and "Water pressure Press and hold both the "Stop"... -
Page 46: Registering Personal Settings
Operation Registering Personal Settings Register your preferred wand position, etc. Press "Personal setting" button. Select the location to be set X The setting changes each time the button is pressed once. Register1 Register2 Register3 Register4 Set your preferences for "Wand position", "Water pressure"... -
Page 47: Sensor Detection Range
Operation Changing Settings Sensor detection range Use the "Water pressure adjustment -" and You can change when to open the toilet lid "Water pressure adjustment +" buttons to select upon entering the bathroom [SET 1], [SET 2], [SET 3], [SET 4], or [SET 5]. X The setting changes each time the button is pressed once. -
Page 48: Maintenance
Maintenance Maintenance Before maintenance Power Plug WARNING y Dry cloth Always turn off the power before maintenance or inspection. Failure to do so may cause electric shock or mal- y Wet cloth function, resulting in a breakdown. For safety, turn the power OFF Approximately once a month before maintenance. -
Page 49: Main Unit
Maintenance Maintenance Main Unit Manual spray EWATER+ mist can be sprayed to separate dirt from the surface for maintenance. y Soft cloth soaked in water Approximately daily y Toilet paper <Manual spray> y Dry cloth y Nylon scrubbing brush Remote control back side May cause damage. -
Page 50: Gap Between The Main Unit And Bowl Unit
Maintenance Gap between the Main Unit Mount the main unit. and Bowl Unit You can remove the main unit to clean the top of With hole No hole Base plate Base plate the bowl unit and the bottom of the main unit. y Soft cloth soaked in water y Toilet paper y Dry cloth... -
Page 51: Gap Between The Main Unit And The Toilet Lid
Maintenance Maintenance Gap between the Main Unit Wipe with a soft cloth that has been soaked in and the Toilet Lid water and wrung-out thoroughly. The toilet lid can be removed for thorough cleaning. Reinstall the toilet lid. y Soft cloth soaked in water D Align the right side pin and hinge parts. -
Page 52: Wand
Maintenance Wand Wipe with a soft cloth that has been soaked in water and wrung out thoroughly. y Soft cloth soaked in water y Toilet paper y Dry cloth y Nylon scrubbing brush May cause damage. Attention Do not pull, push or press the wand with excessive Approximately once a month force. -
Page 53: Deodorizing Filter
Maintenance Maintenance Deodorizing Filter Approximately once a month Turn the power "OFF". ( Page 47) Remove the deodorizing filter. Hold the tab and pull outward. Deodorizing filter Attention Do not pull the unit with undue force. Doing so may cause damage or malfunction. Clean with a tool such as a toothbrush. -
Page 54: Drain Plug With Water Supply Filter
Maintenance Drain plug with water supply Clean the filter with a tool such as a toothbrush. filter X Also, remove any dust from inside the hole of the drain plug with water supply filter. Approximately once every 6 months If you think the water pressure has weakened Reinstall the drain plug with water supply filter and close the cover. -
Page 55: Reference
Reference What to Do? If the water does not If you cannot operate flow due to a water with the remote control service interruption If the low battery warning mark " " on the surface of the remote control is flashing, please Make sure to also check the instruction manual of replace the batteries. -
Page 56: Freeze Damage Prevention
Reference 4) Only if the water supply hose is exposed on the Freeze Damage side of the main unit. Drain the water from the water supply hose. Prevention Water supply hose Horizontally When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing. -
Page 57: Long Periods Of Disuse
Reference What to Do? Long Periods of Disuse Drain the pipe. 1) Open the toilet seat and lid. If the toilet is in a location you will not visit for a 2) Insert a flat-head screwdriver in the hook of the cover to open it. -
Page 58: Resupplying The Water
Reference Resupplying the Water Reinstall the drain plug with water supply filter and close the cover. Open the shutoff valve. ( Page 19) X Check that water is not leaking from a pipe or the 1) Insert the drain plug with water supply filter and main unit. -
Page 59: How To Remove The Operation Guide
Reference What to Do? How to remove the operation guide To remove, follow the procedure below. Turn the power "OFF". ( Page 47) Remove the remote control from the hanger. ( Page 18) Remove the hanger and operation guide. Phillips screwdriver Screw Hanger... -
Page 60: Troubleshooting
B: Is the Energy saver LED lit? If the problem persists, consult the installer, seller or TOTO customer service ( see contact information X While the LED is lit, energy saver ( Pages 30, 31) is on the back cover). -
Page 61: Rear Washing, Front Washing And Wand
If the above symptom reappears There may be a malfunction. XConsult the installer, seller, or TOTO customer service ( see contact information on the back cover). When sitting on the toilet seat, is there a toilet seat cover or clothing on the seat... -
Page 62: Warm Air Drying
Reference Water comes out unexpectedly When you sit on the toilet seat, water comes out for several seconds while water is from the wand warmed up. Has the CLEAN indicator lit up in a cycle? X "Auto wand CLEAN" starts and the wand is cleaned. ( Page 24) Warm air drying Trouble Please check... -
Page 63: Toilet Seat And Toilet Lid (Auto Open/Close)
Reference Troubleshooting Flushing (continue) Trouble Please check The bowl unit does not clean When sitting on the toilet seat, is there a toilet seat cover or clothing on the seat sensor? Or are you sitting without touching the seat sensor? automatically or timing is delayed X Check the location of the seat sensor and sit down so that it touches your skin (Auto flushing) -
Page 64: Toilet Seat And Toilet Lid
Reference The toilet lid opens on its own Because the body sensor can detect movement through the wall or door in front of the toilet, the "Auto open/close" function may cause the toilet lid to open automatical- ly even when you are outside of the bathroom. X You can also set "Auto open/close"... -
Page 65: Auto Flush Lid Closed
Reference Troubleshooting Auto flush lid closed Trouble Please check "Auto flush lid closed" does not Is "Auto flush lid closed" turned OFF? X Turn it ON. ( Pages 34, 35) activate If "Auto flush lid closed" is turned ON: Check the "Auto flushing"... -
Page 66: Deodorizer
Reference Deodorizer Trouble Please check The deodorizer seems to be not Is "Deodorizer" set to "OFF"? X Set to "ON". ( Page 40) working Even after sitting down, you do not hear operation sounds. X Sit so your skin is in direct contact with the seat sensor. ( Page 9) If you hear an operation sound from the deodorizer, but odors are not removed. -
Page 67: Lights
If the nut of the connecting pipe is loosened, retighten it by hand. Do not use any tool. ing connections X If the water leak does not stop, close the shutoff valve and consult with TOTO customer service. ( see contact information on the back cover) The main unit is unstable Are the bolts that anchor the main unit loose? X Remove the main unit and then firmly tighten the base plate bolts. - Page 68 Reference The main unit makes a sound When not using the product (e.g., at night) You may hear the following sounds if "Auto wand CLEAN" or "Auto bowl CLEAN" is "ON" and if you do not use the washing functions (e.g.,Rear washing and Front washing) for about 8 hours.
-
Page 69: Specifications
Weight About 11 lb (about 5 kg) When disposing of this product, please follow your local or state guidelines for proper disposal. *1 At 29 PSI (0.20 MPa) water pressure *2 Temperature around the warm air outlet measured by TOTO. -
Page 70: Limited Warranty
8. To obtain warranty repair service under this warranty, TOTO reserves the right to make such inspections as may be you must take the Product or deliver it prepaid to a TOTO necessary in order to determine the cause of the defect. - Page 71 Reference MEMO...
- Page 72 Reference MEMO...
Need help?
Do you have a question about the S7 Round and is the answer not in the manual?
Questions and answers