Architectural Mailboxes 7517 Assembly Instructions

CONTACT YOUR LOCAL POST OFFICE BEFORE INSTALLING THE MAILBOX TO ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT THE
STREET. GENERALLY, MAILBOXES ARE INSTALLED AT A HEIGHT OF 41-45 INCHES FROM THE ROAD SURFACE TO INSIDE FLOOR OF THE
MAILBOX OR POINT OF MAIL ENTRY (LOCKED DESIGNS) AND ARE SET BACK 6-8 INCHES FROM THE FRONT FACE OF CURB OR ROAD
EDGE TO THE MAILBOX DOOR.
Hardware
(included)
To join the two post pieces:
x 3, large sheet metal screws
To attach the mounting plate
to the post:
x 4, small hex bolts
x 8, small washers
x 4, small nuts
1a
Lay post pieces on a flat surface, making sure
to align the screw holes.
2
Carefully slide the plastic bracket over the top
post and let it rest on the heads of the sheet
metal screws.
R
To attach the mailbox to the top plate
(using side mount holes):
x 4, long pan head screws
x 4, small hex nuts
x 4, spacers (if needed)
3" Round Post with Cover | Model 7517
ASSEMBLY INSTRUCTIONS
To attach the mailbox to the plate:
x 4, large hex bolts
x 8, large washers
x 4, large nuts
To join the two decorative covers:
x 4, small Phillips screws
1b
Join the two post pieces together using the 3
sheet metal screws.
! DO NOT overtighten. Tighten only until snug.
3
Attach the mounting plate to the post using
the 4 small hex bolts, nuts and 8 small
washers.
Insert the bolt and one washer
through inside of the post and
secure with another washer and
nut from the outside.
Tools
(not included)
Two Wrenches
- or -
One Phillips Screwdriver
x3
Rev. I © 2020, Architectural Mailboxes, LLC