Advertisement
Quick Links
Installation Instructions:
The Ring, Label Line and Trellis
Introduction
This guide will provide a detailed overview for installing The Ring, Label Line and Trellis systems
by Genuwine Cellars.
It is important to read through all steps before beginning, and to make any necessary
adjustments based on the specific application to your room.
Please use the attached CAD document to reference the standard spacing dimensions
between components.
Advertisement
Related Manuals for Genuwine Cellars The Ring
Summary of Contents for Genuwine Cellars The Ring
- Page 1 The Ring, Label Line and Trellis Introduction This guide will provide a detailed overview for installing The Ring, Label Line and Trellis systems by Genuwine Cellars. It is important to read through all steps before beginning, and to make any necessary adjustments based on the specific application to your room.
- Page 2 Installation Instructions: The Ring, Label Line and Trellis Installation Steps 1) The Ring, Label Line and Trellis are shipped with the racking components (i.e., bottle holders), cables, and ceiling anchors preassembled. The floor anchors are shipped loose. a) Remove the Cap from the Base of the ceiling anchor.
- Page 3 Installation Instructions: The Ring, Label Line and Trellis 9) Place the supplied set screws into Tension Nut and screw them against the cable so that the nut will hang at least a quarter of the way into Base piece. Ensure that both set screws have been used and that the connection with the cable is firm.
Need help?
Do you have a question about the The Ring and is the answer not in the manual?
Questions and answers