Pegasus LUXURY AT HAND VERMONT 9078-M30 Quick Start Manual

= |
PEGASUS.
9078-M30
Parts/Hardware Included
Product Specification
e Birch Solid Wood Frame
Plastic Plug AAA
3x (E Part #: 200001
Wood Screw
3x GA Part #: 115010
Wood cleat
1x Sy Part #: 7001
e Espresso Color Finish
e Wood Cleat Included
e Beveled Edge Mirror
e (30W x 2.5D x 32H) Inch
ix CO, e
Suggested Tools LY = l CQ (=|
and Material P l
Tape Menwa Drill A Safety Glasses Philips Screwdriver
Mirror Installation
Place wood cleat on the wall where the mirror should be hung. Place the level on the wood cleat. Level the wood
cleat, then drill 3 holes on the wall according to the predrilled holes on the wood cleat. Place plastic plugs into
the predrilled holes in the wall; place the wood cleat against the wall and use the wood screws to secure. Mount
the mirror on the wood cleat.
Place wood cleat on the wall Drill 3 holes on the wall Use the wood screws to secure Mount the mirror on the wood cleat.
imal level
plastic —= ~ teta),
plug | wood
| ae screw
wood cleat 4
wood screw `, wood cleat
Care and Cleaning Instruction
Clean the product by using a soft, slightly damp cloth. Buff the product by using a soft, dry cloth. When
cleaning the mirror, spray with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes.
Clean up excess water and spills immediately. Blot instead of using a wiping action. Water left over for a
long period of time will cause white spots in the finish.
Page 1 of 1