Pegasus 9078-M36 Manual

PEGASUS.
LUXURY AT HAND™
Product Specification
e Birch Solid Wood Frame
e Mahogany Color Finish
e Wood Cleat Included
e Beveled Edge Mirror
e (36W x 2.5D x 38H) Inch
Suggested Tools
and Material
a 1
Tape Measure
Mirror Installation
Safety Glasses
VERMONT 36" MIRROR
9078-M36
Parts/Hardware Included
Plastic Plug
A
3x == Part #: 200001
Wood Screw
3x Kram Part #: 115010
Wood cleat
1x Sy Part #: 7001
(7 Level
1x See Part #: 7002
Philips Screwdriver
Place wood cleat on the wall where the mirror should be hung. Place the level on the wood cleat. Level the wood
cleat, then drill 3 holes on the wall according to the predrilled holes on the wood cleat. Place plastic plugs into
the predrilled holes in the wall; place the wood cleat against the wall and use the wood screws to secure. Mount
the mirror on the wood cleat.
Place wood cleat on the wall Drill 3 holes on the wall
C4 level
wood cleat
wood screw
plastic plug
Predrilled holes
Use the wood screws to secure
plastic —=
plug
= , [wood cleat
Mount the mirror on the wood cleat.
wood
screw
Care and Cleaning Instruction
Clean the product by using a soft, slightly damp cloth. Buff the product by using a soft, dry cloth. When
cleaning the mirror, spray with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes.
Clean up excess water and spills immediately. Blot instead of using a wiping action. Water left over for a
long period of time will cause white spots in the finish.
Page 1 of 1