Advertisement
Quick Links
primeCPR
Feedback Quick Guide
Re-Usable Sensor
Information on primeCPR
When attached to the patient's chest, the sensor provides real-time feedback on the
•
performed CPR compressions with measurement of depth and rate for each single
compression, therefore monitoring their quality.
The sensor is suitable for use on adults, and children above the age of 8 years.
•
Use of primeCPR is identified by a green port on your device and a corresponding green plug
•
on the re-usable sensor cable.
Preparing for use of primeCPR
Ensure the primeCPR sensor cable is connected to your device.
A primeCPR PAD must be used so that the primeCPR sensor remains in position and does not lift off
the patient's chest when pressure is relieved, as this will lead to inaccurate measured values.
Step 1
Step 2
Step 3
primeCPR display
Ensure the defibrillator is powered on and in AED or manual mode.
If configured to do so, this action prompt pictogram may appear on your screen. The message can be
closed by selecting the [OK] soft key.
Ortus Academy
Ortus Academy is a trading name of Ortus Technology Limited.
Company Registration 07554900
Peel the primeCPR PAD from its backing and place on the
•
lower third of the sternum, with the red 3M print facing
you.
Remove the protective paper with the 3M print on it.
•
Lay the primeCPR sensor with the red side on the
•
primeCPR PAD.
Place the heel of your hand in the middle of the sensor.
•
Commence CPR and monitor the compression quality
•
on the device, following the audible and visual
instructions provided.
This document has been developed to provide users with an overview for safe device operation in accordance
with its function and intended use and does not replace the user manual. All persons dealing with use,
maintenance and troubleshooting must read and implement the user manual. Illustrations may not reflect
that displayed on your device. Subject to technical modifications, mistakes, and printing errors.
Academy_primeCPR Feedback Quick Guide_SWV4.3_A024_v1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for corpuls primeCPR
Summary of Contents for corpuls primeCPR
- Page 1 Ensure the primeCPR sensor cable is connected to your device. A primeCPR PAD must be used so that the primeCPR sensor remains in position and does not lift off the patient’s chest when pressure is relieved, as this will lead to inaccurate measured values.
- Page 2 • The resuscitation is finished • primeCPR Summary As a configurable option, the retrospective CPR evaluation can be printed via the mission browser. Cleaning and Disinfecting Follow your organisation’s Infection Control policy and procedures, with an awareness that use of non-manufacturer recommended agents may cause damage to the equipment and its components, over time.
- Page 3 Academy_primeCPR Feedback Quick Guide_SWV4.3_A024_v1 Ortus Academy This document has been developed to provide users with an overview for safe device operation in accordance Ortus Academy is a trading name of Ortus Technology Limited. with its function and intended use and does not replace the user manual. All persons dealing with use, Company Registration 07554900 maintenance and troubleshooting must read and implement the user manual.
Need help?
Do you have a question about the primeCPR and is the answer not in the manual?
Questions and answers